Jan 23, 2020
06:36 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jan 23, 2020
06:36 AM
I wanted to use CCU42 on the XMC 4100 for a timer (having previously got this working on CCU40) . I tried to run the example project in XMClib for the XMC4500, however I get the error " 'CCU42_CC43' undeclared (first use in this function)"
Investigating further I found CCU42_CC43 is defined in XMC_Peripheral_Library_v2.1.24/CMSIS/Infineon/XMC4500_series/Include/XMC4500.h , but in the same file for the XMC4100 or XMC4200 there are only definitions for CCU40 and CCU41.
I am wondering why there wouldn't be definitions for CCU42 and CCU43 for these micro controllers. Is there another way to use these CCUs?
Thank you for any help or information
Investigating further I found CCU42_CC43 is defined in XMC_Peripheral_Library_v2.1.24/CMSIS/Infineon/XMC4500_series/Include/XMC4500.h , but in the same file for the XMC4100 or XMC4200 there are only definitions for CCU40 and CCU41.
I am wondering why there wouldn't be definitions for CCU42 and CCU43 for these micro controllers. Is there another way to use these CCUs?
Thank you for any help or information
Solved! Go to Solution.
1 Solution
Jan 30, 2020
04:07 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jan 30, 2020
04:07 AM
2 Replies
Jan 23, 2020
07:00 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jan 23, 2020
07:00 AM
It seems there are only 2 CCU4s on the xmc4100/200. Not very clear from the reference manual but seems to be shown in here
Jan 30, 2020
04:07 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jan 30, 2020
04:07 AM
Hi,
Check the data sheet, it is specified there.
Regards,
Jesus
Check the data sheet, it is specified there.
Regards,
Jesus