TLE5012B in bus mode

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User18851
Level 1
Level 1
In my application, I need to use four TLE5012, read through SPI.
Four chips, I use 1 CLK, 1 DATA, 4 CS connections.
A single one can be used normally. But when four are used together.
When one CS line is low and the rest are high, the DATA line will be forced to LOW. In other words, when CS is high, DATA is not the high resistance I want.
Why is that?
0 Likes
2 Replies
User270
Level 5
Level 5
5 solutions authored First solution authored
The SSC interface has the defaut push-pull configuration. To use the open-drain configuration the bit SSC_OD has to be used.See sections 3.7/3.8 in the user's manual.
0 Likes
User18851
Level 1
Level 1
Here with me。No matter what mode DATA is set to,As long as CSQ is not selected (high), DATA will be forced low.
0 Likes