EtherCAT Slave does not appears after scanning EtherCAT master.

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User18406
Level 1
Level 1
Hi
Following are the tools and Kits I am using for running the demo example mentioned in this document
HW Kit: XMC4300 Relax EtherCAT Kit.(KIT_XMC43_RELAX_ECAT_V1)
DAVE: 4.4.2
Slave Stack Code Tool Version: 5.12
TwinCAT: 3.1

The network adapter in TwinCAT is listed as "installed and realtime capable"

In step 7 (How to test – using TwinCAT3 as host) of the mentioned document
When I scan EtherCAT master for boxes I don't see any slave appeared on the master bus.

Thanks
Krishna
0 Likes
1 Solution
User16529
Level 4
Level 4
First solution authored
Try to use twincat 2 instead of 3.1 and run in on a virtual machine with windows xp

View solution in original post

0 Likes
1 Reply
User16529
Level 4
Level 4
First solution authored
Try to use twincat 2 instead of 3.1 and run in on a virtual machine with windows xp
0 Likes