Hall-Effect Detection

Announcements

Measure CO2 When It Matters - Infineon’s XENSIV™ PAS CO2 now comes in SparkFun Red. Check it now!

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User16101
Level 1
Level 1
5 questions asked First reply posted First question asked
Dear Hall Sensor team

We changed VS Voltage 12V to 5V as a attach file that is TLV4996K_VS.
3964.attach

It has happened strange waveform as a attach file that low is 1.3V.
3951.attach

So, We tested VS has R Value(220 ohm) to 0 ohm. and then, The above phenomenon wrong waveform disappeared.
3965.attach

Can we use schematics it. and Can you recommend schematics?

Thanks
Best Regards
Gerald.
0 Likes
1 Reply
User270
Level 5
Level 5
5 solutions authored First solution authored
Just connect VS to 5V. See als 3.3V design here TLE4966K Hall switch Shield2Go.
0 Likes