infineon4engi@twitter infineon4engineers infineon@linkedin infineon@youtube
twitter Facebook Linkedin Youtube

+ Reply to Thread
Results 1 to 2 of 2

Thread: Smart MOSFET BTS50055-1TMA will it support 62A

  1. #1
    New Member New Member stephen is on a distinguished road
    Join Date
    Jan 2020
    Posts
    1
    Points
    15

    Smart MOSFET BTS50055-1TMA will it support 62A

    Hi,

    I have been going through an application which requires 62A high side output with around 80A peak current support for 10s.

    Will this device suit my purpose. There seems two specification IL(ISO)=70A and IL(NOM)=17A. Im not sure which one to follow.

    Thanks for any help

  2. #2
    New Member New Member Holmer is on a distinguished road
    Join Date
    Jun 2020
    Posts
    4
    Points
    100
    The ISO rating blindly assumes half a Volt drop over the switch, it gives 35W dissipation which at 33K/W equals 1155 deg. C above ambient.
    It probably is a left-over from the time these smart switches had TO220 tabs, which would give realistic temps with good grease and an infinite heat sink.

    The 17A are OK, 17Ax17Ax7.9mR=2.3W, and 2,3Wx33K/W = 75deg. above 85C ambient = 150C. (7.9mR is the Rds,on at 150C)

    You could get away with a Copper heat slug below the D2PAK and a heat spreader/sink below that, if cool down time after the 10 second pulse is long enough.
    Some board makers incorporate Copper "coins" in boards with holes the size of D2PAK tabs just for this purpose.

+ Reply to Thread
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.