infineon4engi@twitter infineon@linkedin infineon4engineers infineon@youtube
twitter Facebook Linkedin Youtube

+ Reply to Thread
Results 1 to 2 of 2

Thread: TDA5150 PLL error

  1. #1
    New Member New Member andrvisht is on a distinguished road
    Join Date
    Jan 2020
    Posts
    2
    Points
    35

    TDA5150 PLL error

    Hi All.

    I tuned the registers according to the set frequency in TESEUS.
    XTAL 13.56 MHz
    out freq: 868.4 MHz
    ISM - 2
    PLL INT - 63
    PLL FRAC 2: 1: 0 - 16 169 39
    FRAC compensation 1
    VAC FAST COUNTER - 256
    But when I try to issue a signal, I get the status
    PLL lock detector error

    I tried different crystal oscillators, but as soon as the PLL value should give out the frequency in the selected ISM range, I get this error.
    Click image for larger version

Name:	1.jpg
Views:	1
Size:	130.8 KB
ID:	4363
    Click image for larger version

Name:	2.jpg
Views:	1
Size:	119.0 KB
ID:	4364
    Click image for larger version

Name:	3.jpg
Views:	2
Size:	111.5 KB
ID:	4365
    Click image for larger version

Name:	4.jpg
Views:	1
Size:	115.4 KB
ID:	4366
    Click image for larger version

Name:	5.jpg
Views:	1
Size:	87.7 KB
ID:	4367
    What am I missing?
    Last edited by andrvisht; Jan 6th, 2020 at 02:33 AM.

  2. #2
    New Member New Member andrvisht is on a distinguished road
    Join Date
    Jan 2020
    Posts
    2
    Points
    35
    Support cannot help.
    Anyone got any ideas?

+ Reply to Thread
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.