We were previously using your TLV493d sensor and had that working fine but the power consumption was too high for our needs, therefore, we are trying to move to the TLE493d with the Wake Up functionality.
It took a while to find the correct I2C sensor address of 0x22 but now I can finally talk to the sensor.
However, when taking readings from the senor it is sending a response of 0xFF for all registers.

I have tried using 2-byte read (supposed default) as well as 1-byte read just in case.

I really need to have this working as soon as possible so any help would be greatly appreciated!

Thank you.