Family Tri-Core aurix TC29

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User18500
Level 1
Level 1
I would like to understand the meaning of WDTSLCK that can be configured in PIN 20.9)

Thanks in advance for your answer.

JM
0 Likes
4 Replies
Fiz
Moderator
Moderator
Moderator
First like received 50 replies posted 25 replies posted
Hello JM,

I will move your thread to the aurix forum.

Best,
Fiz
0 Likes
cwunder
Employee
Employee
5 likes given 50 likes received 50 solutions authored
You can read about this in the user's manual, have a look at the SAFECON.HBT (Safety Heartbeat Register). The WDTSLCK is related to to the Safety Watchdog.

This bit can be used by software to provide a “heartbeat” indication to an external safety monitoring device. It directly controls the output on the heartbeat ports. WDTxLCK P20.9, P20.8, P20.7 and/or P20.6 (Subject to port configuration).
0B Port drives low (reset value)
1B Port drives high
Writes are only possible when Safety ENDINIT=0
0 Likes
User18500
Level 1
Level 1
Thank you so much for your answer. Currently, I'm working on the TC3xxx family, specifically TC39. I tried to looking for this functionality on this kind of board, however I haven't. Do you know if this functionality can be configured in this board?
0 Likes
ScottW
Employee
Employee
10 sign-ins First solution authored First like received
The WDT heartbeat function is no longer available in the TC3xx family. You'll need to toggle a GPIO pin to reproduce the functionality.
0 Likes