What is a Standby Controller (SCR)?

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User17740
Level 4
Level 4
First solution authored First like received
Hi all,

could you please let me know what is a Standby Controller (SCR) on AURIX TC3xx ?

Thanks!

Regards
Bernie



#8042000 19492
0 Likes
5 Replies
User13290
Level 5
Level 5
First like received First solution authored

Hi Bernie,

I recommend you take a look at AP32332 available within the MyICP portal. Standby mode is typically used to have AURIX enter (or wake from) a low power consumption mode. This application note will walk you through it.

Best regards,

Henk-Piet Glas
Principal Technical Specialist
Embedded Software

0 Likes
User18237
Level 5
Level 5
First solution authored First like received
Hi Bernie,


SCR is an 8-bit microcontroller that can continue to run during the standby mode in order to reduce current consumption until the main core/cores wakes/wake up.


Best regards
Mr. AURIX™
0 Likes
User20124
Level 1
Level 1
10 sign-ins First question asked First reply posted
HIGHTEC.henk-piet.glas wrote:

Hi Bernie,

I recommend you take a look at AP32332 available within the MyICP portal. Standby mode is typically used to have AURIX enter (or wake from) a low power consumption mode. This application note will walk you through it.

Best regards,

Henk-Piet Glas
Principal Technical Specialist
Embedded Software


Hello Henk-Piet,
is your mentioned application note still valid? I've searched for it but couldn't find it at MyICP.

Best regards,
Jens
0 Likes
User20124
Level 1
Level 1
10 sign-ins First question asked First reply posted
Jens wrote:
Hello Henk-Piet,
is your mentioned application note still valid? I've searched for it but couldn't find it at MyICP.

Best regards,
Jens

Ok, I guess I found an app note for the SCR, but with a different number, "AP32465 Standby controller and standby mode of AURIX™":
https://myicp.infineon.com/sites/microcontrollers-aurix_customer_doc/Lists/defaultdoclib/AURIX%20TC3...
But thanks anyway for pointing the direction.
0 Likes
MoD
Employee
Employee
50 likes received 500 replies posted 100 solutions authored
The AppNote is valid and available via myicp.
Look in the folder AURIXTC 2xx -> 00 AURIX TC2xx General -> 04 Application Notes
There you will find AURIX_Standby_Power_Mode__AP32332.pdf
To get information about SCR you must check the user manual, the AppNote describe only the power modes.
0 Likes