Oct 29, 2019
02:40 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Oct 29, 2019
02:40 AM
Hi,
I am just starting with the XMC 4300 Ethercat Dave example from here https://www.infineon.com/dgdl/Infineon-XMC4300_Relax_EtherCat_APP_Slave_SSC-GS-v01_03-EN.pdf?fileId=....
My problem is on Page 28. When I open the Manual Pin Allocator my output looks like this:
The Pin numbers are not assigned. Any ideas? (Board is connected and recognized by the PC)
Many thanks for your help. Have a nice day and cheers.
I am just starting with the XMC 4300 Ethercat Dave example from here https://www.infineon.com/dgdl/Infineon-XMC4300_Relax_EtherCat_APP_Slave_SSC-GS-v01_03-EN.pdf?fileId=....
My problem is on Page 28. When I open the Manual Pin Allocator my output looks like this:
The Pin numbers are not assigned. Any ideas? (Board is connected and recognized by the PC)
Many thanks for your help. Have a nice day and cheers.
Labels
- Tags:
- IFX
0 Replies