Oct 24, 2019
11:59 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Oct 24, 2019
11:59 PM
In the IC IRSM005-800MH,
Q1. What is LO and LO condition?
Q2. Can I use this IC as H-bridge of a motor having 24V input?
Q3. Can I give PWM signal on HIN and 0v(GND) on LIN to rotate the motor in one direction?
Regards,
Dileep.
Q1. What is LO and LO condition?
Q2. Can I use this IC as H-bridge of a motor having 24V input?
Q3. Can I give PWM signal on HIN and 0v(GND) on LIN to rotate the motor in one direction?
Regards,
Dileep.
Solved! Go to Solution.
Labels
- Labels:
-
ispn:13157:1:0
-
l1:144:1:0
-
l2:231:1:0
- Tags:
- IFX
1 Solution
Oct 25, 2019
08:59 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Oct 25, 2019
08:59 AM
In the IC IRSM005-800MH,
Q1. For LO and LO condition, there is no output or gate voltage available. Both MOSFETs will be off.
Q2. Can I use this IC as H-bridge of a motor having 24V input? Yes, two ICs can drive a 24V motor.
Q3. Can I give PWM signal on HIN and 0v(GND) on LIN to rotate the motor in one direction. Yes.
Q1. For LO and LO condition, there is no output or gate voltage available. Both MOSFETs will be off.
Q2. Can I use this IC as H-bridge of a motor having 24V input? Yes, two ICs can drive a 24V motor.
Q3. Can I give PWM signal on HIN and 0v(GND) on LIN to rotate the motor in one direction. Yes.
1 Reply
Oct 25, 2019
08:59 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Oct 25, 2019
08:59 AM
In the IC IRSM005-800MH,
Q1. For LO and LO condition, there is no output or gate voltage available. Both MOSFETs will be off.
Q2. Can I use this IC as H-bridge of a motor having 24V input? Yes, two ICs can drive a 24V motor.
Q3. Can I give PWM signal on HIN and 0v(GND) on LIN to rotate the motor in one direction. Yes.
Q1. For LO and LO condition, there is no output or gate voltage available. Both MOSFETs will be off.
Q2. Can I use this IC as H-bridge of a motor having 24V input? Yes, two ICs can drive a 24V motor.
Q3. Can I give PWM signal on HIN and 0v(GND) on LIN to rotate the motor in one direction. Yes.