infineon4engi@twitter twitter

infineon4engineers Facebook

infineon@linkedin linkedin

infineon@youtube youtube


+ Reply to Thread
Results 1 to 1 of 1
  1. #1
    New Member New Member 636steve is on a distinguished road
    Join Date
    Oct 2019
    Posts
    1
    Points
    30

    IFX007 juddering motor

    Hi all

    I have a design that drives two 12v dc motors using the reference design set up for a bi-directional h bridge. This has worked well for about a year.

    We now need to drive a 28v dc version of the motor and have been experiencing some issues. The motors seem to judder depending on the speed they are running at. i.e they could be fine at 25% speed then judder at about 50% to 75% speed and then be fine to 100% speed.

    The original design used the BTN8982A device which I understand from the data sheet may not work correctly above 18V so have switched to the IFX007 which states it should be good up to 40v, but still have the same proiblem.

    I have tried different values of DC-Link capacitor thinking this could be causing it but this doesn't seem to make much difference except for making it worse if I make it too big.

    Can anyone offer any ideas as to why it may be juddering? I have also tried on 24V and it does the same thing.

    Thanks
    Last edited by 636steve; Oct 14th, 2019 at 03:54 AM.

Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.