infineon4engi@twitter infineon@linkedin infineon4engineers infineon@youtube
twitter Facebook Linkedin Youtube

+ Reply to Thread
Results 1 to 2 of 2

Thread: IFX007 juddering motor

  1. #1
    New Member New Member 636steve is on a distinguished road
    Join Date
    Oct 2019
    Posts
    1
    Points
    15

    IFX007 juddering motor

    Hi all

    I have a design that drives two 12v dc motors using the reference design set up for a bi-directional h bridge. This has worked well for about a year.

    We now need to drive a 28v dc version of the motor and have been experiencing some issues. The motors seem to judder depending on the speed they are running at. i.e they could be fine at 25% speed then judder at about 50% to 75% speed and then be fine to 100% speed.

    The original design used the BTN8982A device which I understand from the data sheet may not work correctly above 18V so have switched to the IFX007 which states it should be good up to 40v, but still have the same proiblem.

    I have tried different values of DC-Link capacitor thinking this could be causing it but this doesn't seem to make much difference except for making it worse if I make it too big.

    Can anyone offer any ideas as to why it may be juddering? I have also tried on 24V and it does the same thing.

    Thanks
    Last edited by 636steve; Oct 14th, 2019 at 02:54 AM.

  2. #2

    Infineon Employee
    Infineon Employee
    Jing.N is on a distinguished road
    Join Date
    Jun 2018
    Posts
    44
    Thanks very much for your interest.

    For BTN8982TA: The parameters specified in our datasheet might have deviation when the voltage is higher than 18V.
    For IFX007T: According to industrial standard, the parameters are only specified at 24V. It can also have deviations when the VS is 28V.


    If you could provide some measurement result(e.g. screenshot from oscilloscope), we can help you better. It is difficult to locate the problem only based on your rough description.
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

+ Reply to Thread
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.