Error in script programming of IMC101T. Need to manufacture at least 1K vfd with IC.

Announcements

From sunburn to sun earn – we’ve got the power! Watch our #poweringgreen videos now.

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User18171
Level 1
Level 1
First question asked
Hello all,

We are trying to evaluate the EVAL-M1-101T evaluation board based on IMC101T-T038.
We are using MCEWizard for configuring motor parameters and using MCEDesigner to program the IC.
We can program all the files as suggested in the user manual in the following link.
https://www.infineon.com/dgdl/Infineon-An2018-01_EVAL-M1-101T_User_Manual-UM-v01_06-EN.pdf?fileId=55...

Our application requires driving an induction motor, and thus we are following the Infineon application note for getting our motor run.
https://www.infineon.com/dgdl/Infineon-Induction_motor_control_by_iMOTION-ApplicationNotes-v01_00-EN...

I have successfully configured and programmed the IC according to the document. But when I upload the script, I get version mismatch in the MCE Designer.
As we look forward to manufacturing at least 1000 numbers of the VFD using this IC per month, but can't find the problem.
I have attached the error image for reference.
Any help would be highly appreciated.
Thanking you in anticipation.

3797.attach
0 Likes
2 Replies
User13282
Level 3
Level 3
25 replies posted 10 replies posted 5 replies posted
It seems that you did not combine the script code with the configuration file.

Please make sure as well, that you have downloaded the latest versions of the software.

IMC101T-T038 MCE Software Package v1.2.1
MCEWizard v2.2
MCEDesigner v2.2
0 Likes
User17471
Level 2
Level 2
5 replies posted First question asked First reply posted
I got this error when I added global variables to the script. They must somehow be added to the program map.
0 Likes