Oct 09, 2019
10:18 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Oct 09, 2019
10:18 PM
Hello all,
We are trying to evaluate the EVAL-M1-101T evaluation board based on IMC101T-T038.
We are using MCEWizard for configuring motor parameters and using MCEDesigner to program the IC.
We can program all the files as suggested in the user manual in the following link.
https://www.infineon.com/dgdl/Infineon-An2018-01_EVAL-M1-101T_User_Manual-UM-v01_06-EN.pdf?fileId=55...
Our application requires driving an induction motor, and thus we are following the Infineon application note for getting our motor run.
https://www.infineon.com/dgdl/Infineon-Induction_motor_control_by_iMOTION-ApplicationNotes-v01_00-EN...
I have successfully configured and programmed the IC according to the document. But when I upload the script, I get version mismatch in the MCE Designer.
As we look forward to manufacturing at least 1000 numbers of the VFD using this IC per month, but can't find the problem.
I have attached the error image for reference.
Any help would be highly appreciated.
Thanking you in anticipation.
We are trying to evaluate the EVAL-M1-101T evaluation board based on IMC101T-T038.
We are using MCEWizard for configuring motor parameters and using MCEDesigner to program the IC.
We can program all the files as suggested in the user manual in the following link.
https://www.infineon.com/dgdl/Infineon-An2018-01_EVAL-M1-101T_User_Manual-UM-v01_06-EN.pdf?fileId=55...
Our application requires driving an induction motor, and thus we are following the Infineon application note for getting our motor run.
https://www.infineon.com/dgdl/Infineon-Induction_motor_control_by_iMOTION-ApplicationNotes-v01_00-EN...
I have successfully configured and programmed the IC according to the document. But when I upload the script, I get version mismatch in the MCE Designer.
As we look forward to manufacturing at least 1000 numbers of the VFD using this IC per month, but can't find the problem.
I have attached the error image for reference.
Any help would be highly appreciated.
Thanking you in anticipation.
- Tags:
- IFX
2 Replies
Oct 14, 2019
02:15 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Oct 14, 2019
02:15 AM
It seems that you did not combine the script code with the configuration file.
Please make sure as well, that you have downloaded the latest versions of the software.
IMC101T-T038 MCE Software Package v1.2.1
MCEWizard v2.2
MCEDesigner v2.2
Please make sure as well, that you have downloaded the latest versions of the software.
IMC101T-T038 MCE Software Package v1.2.1
MCEWizard v2.2
MCEDesigner v2.2
Oct 14, 2019
10:28 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Oct 14, 2019
10:28 PM
I got this error when I added global variables to the script. They must somehow be added to the program map.