Sep 23, 2019
07:27 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 23, 2019
07:27 AM
Infineon Team,
I was reading the data sheet for the IRL7472L1TRPbF and when looking into there thermal specs I saw that a thermal resistance of 20C/W was able to be achieved with 'a small clip on heat sink'.
I was wondering if you could provide a part number for the heat sink used to meet this spec. Thank you!
-Tom
Datasheet:
https://www.infineon.com/dgdl/Infineon-IRL7472L1-DS-v02_00-EN.pdf?fileId=5546d46254e133b401555d17178...
I was reading the data sheet for the IRL7472L1TRPbF and when looking into there thermal specs I saw that a thermal resistance of 20C/W was able to be achieved with 'a small clip on heat sink'.
I was wondering if you could provide a part number for the heat sink used to meet this spec. Thank you!
-Tom
Datasheet:
https://www.infineon.com/dgdl/Infineon-IRL7472L1-DS-v02_00-EN.pdf?fileId=5546d46254e133b401555d17178...
Solved! Go to Solution.
- Tags:
- IFX
- power mosfet
1 Solution
May 06, 2020
02:44 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
May 06, 2020
02:44 PM
Hi Tom,
We typically do not recommend specific heatsink part numbers since this will depend on your design and thermal needs, however we can offer you some guidelines on proper mounting techniques to use with the DirectFET package. Here is a link to the recommended application note:
https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a...
Regards,
D. Pinto
We typically do not recommend specific heatsink part numbers since this will depend on your design and thermal needs, however we can offer you some guidelines on proper mounting techniques to use with the DirectFET package. Here is a link to the recommended application note:
https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a...
Regards,
D. Pinto
1 Reply
May 06, 2020
02:44 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
May 06, 2020
02:44 PM
Hi Tom,
We typically do not recommend specific heatsink part numbers since this will depend on your design and thermal needs, however we can offer you some guidelines on proper mounting techniques to use with the DirectFET package. Here is a link to the recommended application note:
https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a...
Regards,
D. Pinto
We typically do not recommend specific heatsink part numbers since this will depend on your design and thermal needs, however we can offer you some guidelines on proper mounting techniques to use with the DirectFET package. Here is a link to the recommended application note:
https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a...
Regards,
D. Pinto