+ Reply to Thread
Results 1 to 2 of 2

Thread: FAQ BLDC motor shield with TLE9879QXA40 for Arduino

  1. #1
    Moderator
    Infineon Employee
    Infineon Employee
    Fiz is on a distinguished road
    Join Date
    Jun 2019
    Posts
    70

    FAQ BLDC motor shield with TLE9879QXA40 for Arduino

    1) Can the board handle VBAT = 24V?
    The normal operating range for the TLE987QXA40 is 5.5V-28V.
    The board is capable of handling 24V, but it is not recommended to evaluate 24V truck applications since the IC is designed for 12V automotive applications.
    The absolute maximum ratings of the device must be ensured as specified in the datasheet.
    Especially the power loss in the PMU needs to be handled very carefully, since the internal linear voltage regulator will have to handle a much higher voltage drop.
    Click image for larger version

Name:	PPMU.png
Views:	0
Size:	16.0 KB
ID:	4162
    Furthermore, the firmware is limited to 17.3V in the example codes.
    If you want to use the board at 24V, you have to adapt our code or write a custom firmware.

    Link to the datasheet: https://www.infineon.com/dgdl/Infine...5a89d10a283f20

    2) What is the boards maximal power output?
    The PCBs limitation is at 10A, due to the used copper thickness.
    The maximal value for the current sense amplifier is 30A, here the used 5mR shunt limits the maximal detectable current.
    The maximal current rating is valid for the entire voltage operating range.

    3) How much current could the MOSFETs handle?
    The used MOSFETs are IPC90N04S5-3R6 and can handle 90A. But the current is still limited by the PCB.

    Link to the datasheet: https://www.infineon.com/dgdl/Infine...590801d898290a

    4) How is the board protected from overcurrent?
    There is no discrete overcurrent protection in place on the PCB, but the TEL9879s’ protection features can be used to protect the board, such as:
    • Over-/Under-voltage protection
    • Drain-Source monitoring
    • Current limitation with the low side shunt

    5) Is there an Arduino library for torque control?
    At the moment there is only speed control implemented
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

  2. #2
    New Member New Member kostas is on a distinguished road
    Join Date
    Aug 2020
    Posts
    2
    Points
    30
    Hi,

    Is there an easy way to control the board through Raspberry Pi's SPI? Is there a document with the setup protocol?

    Thanks in advance.
    Kostas

+ Reply to Thread

Tags for this Thread

Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.