Aurix Motor Control Kit unsharp figure

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User17934
Level 1
Level 1
Hello,

I am currenty working with the Aurix Motor Control Kit and the PDF “eMotor Drive Kit for the AURIX product family”.
Unfortunately, Figure 21 on page 27 is not sharp and therefore not usable.
Does anyone know how to get a sharp version of this figure, which is the schematic of the motor PCB.

Thanks.
Jerome
0 Likes
5 Replies
NeMa_4793301
Level 6
Level 6
10 likes received 10 solutions authored 5 solutions authored
Hi Jerome. Oops, sorry about that. I've asked for an update. I'm not sure if the app note will get updated, but hopefully we can get at least a PDF of the schematic.
0 Likes
lock attach
Attachments are accessible only for community members.
NeMa_4793301
Level 6
Level 6
10 likes received 10 solutions authored 5 solutions authored
Hi Jerome. Here's the PDF. Let me know if you have any trouble.
0 Likes
User18504
Level 3
Level 3
Hello, is this the kit for the 3 Phase Brushless Motor?
Is it possible to connect the driver board to a different Evaluation Board, for example to TC277_TFT?
0 Likes
NeMa_4793301
Level 6
Level 6
10 likes received 10 solutions authored 5 solutions authored
Hmm. It looks like you could, but the analog inputs are mapped very differently, so you'd have to modify the software to match:

TC2x7 Application Kit:
3903.attach

TC234 Motor Control Kit:
3904.attach
0 Likes
User18504
Level 3
Level 3
I can make a breakout board to match the pins, this shouldn't be a big problem as I would need also to measure signals.
Thanks for the reply, now the question is if the code from the motor kit can also be ported easily to the TC277.
0 Likes