Sep 17, 2019
06:45 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 17, 2019
06:45 AM
2 Replies
Sep 18, 2019
05:20 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 18, 2019
05:20 AM
I know the reason. Because my power supply is 24V, it need to set new monitor upper threshold of VSD in ADC2.
Sep 19, 2019
06:52 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 19, 2019
06:52 AM
Hi Ling Xiao,
exactly, if you want use 24V supply voltage you will need to reconfigure the bits:
ADC2->TH0_3_UPPER.CH2 (VSD overvoltage threshold)
ADC2->TH0_3_UPPER.CH1 (VS overvoltage threshold)
MF->VMON_SEN_CTRL.VMON_SEN_SEL_INRANGE (attenuator factor for VDH monitoring)
The equations for the desired thresholds can be found in the TLE987x User Manual under equation 22.1 and 22.2.
But since VDH is monitored by ADC1 the reference voltage for the calculation of VLSB is VAREF not VBG and the data width also needs to be adapted accordingly. ( 8 or 10 Bit width)
Best,
Fiz
exactly, if you want use 24V supply voltage you will need to reconfigure the bits:
ADC2->TH0_3_UPPER.CH2 (VSD overvoltage threshold)
ADC2->TH0_3_UPPER.CH1 (VS overvoltage threshold)
MF->VMON_SEN_CTRL.VMON_SEN_SEL_INRANGE (attenuator factor for VDH monitoring)
The equations for the desired thresholds can be found in the TLE987x User Manual under equation 22.1 and 22.2.
But since VDH is monitored by ADC1 the reference voltage for the calculation of VLSB is VAREF not VBG and the data width also needs to be adapted accordingly. ( 8 or 10 Bit width)
Best,
Fiz