infineon4engi@twitter infineon4engineers infineon@linkedin infineon@youtube
twitter Facebook Linkedin Youtube

Search:

Type: Posts; User: jferreira

Page 1 of 5 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    1
    Views
    100

    ESP32 IDF seems to have a master implementation...

    ESP32 IDF seems to have a master implementation based on FreeModbus, https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/protocols/modbus.html, which might be easy to port
  2. Hi, I would recommend the following post at...

    Hi,

    I would recommend the following post at interrupt memfault blog, https://interrupt.memfault.com/blog/profiling-firmware-on-cortex-m

    Regards,
    Jesus
  3. Replies
    6
    Views
    375

    Hi, Have you try to program the BMI using...

    Hi,

    Have you try to program the BMI using Infineon Memtool?

    regards,
    Jesus
  4. Replies
    3
    Views
    235

    Hi, Ifx Configwizard can be installed...

    Hi,

    Ifx Configwizard can be installed following the instructions at https://www.infineonforums.com/threads/6586-SOLVED-IFXConfigWizard-V1.8.7?p=19141&viewfull=1#post19141

    Regards,
    Jesus
  5. Replies
    6
    Views
    375

    Hi, The BMI=0xFFD0 corresponds to ASC_BSLTO....

    Hi,

    The BMI=0xFFD0 corresponds to ASC_BSLTO. In this mode, if the external tool is not connecting before 5s then the device switches to User Productive Mode (UPM) where debugging is not possible. ...
  6. Hi, Have a look to...

    Hi,

    Have a look to https://community.arm.com/developer/ip-products/system/b/embedded-blog/posts/shrink-your-mcu-code-size-with-gcc-arm-embedded-4-7

    Regards,
    Jesus
  7. Replies
    5
    Views
    358

    Hi, I have being trying it out and finally you...

    Hi,

    I have being trying it out and finally you need to do something like


    XMC_GPIO_SetMode(SDA_PIN, XMC_GPIO_MODE_INPUT_TRISTATE);
    XMC_I2C_CH_SetInputSource(I2C_CHANNEL,...
  8. Hi, Most of the XMC development kits have an...

    Hi,

    Most of the XMC development kits have an on board debugger that provides additionally a virtual COM port to which you can attach a PC terminal.
    The link you reference above is using the...
  9. Hi, Is the file you are editing supervised by...

    Hi,

    Is the file you are editing supervised by any revision control system you have active, i.e. SVN?
    https://bugs.eclipse.org/bugs/show_bug.cgi?id=350306

    Regards,
    Jesus
  10. Hi, Did you try using the Newlib library...

    Hi,

    Did you try using the Newlib library instead of the default Newlib-nano?
    4988

    Regards,
    Jesus
  11. Replies
    9
    Views
    383

    Hi, The BMI.BSLTO is only valid for any BSL...

    Hi,

    The BMI.BSLTO is only valid for any BSL mode, i.e. ASC Mode, CAN mode and SSC mode
    After the time out expires, the device will boot from flash in user productive mode, i.e. no debug access...
  12. Replies
    9
    Views
    383

    Hi, the BSLTO is part of the BMI configuration...

    Hi,

    the BSLTO is part of the BMI configuration and described in the reference manual:
    4987

    The frequency of the MCLK during the SSW (start up software) is determined by the CLKVAL1_SSW in the...
  13. Replies
    3
    Views
    235

    Hi The IFXConfigWizard tool is as an easy...

    Hi

    The IFXConfigWizard tool is as an easy option to generate the IFX ClassB configuration header file, the ClassB_cfg.h.

    The generated header file can be easily integrated into any IDE.
    ...
  14. Hi, It is not possible since the pins used for...

    Hi,

    It is not possible since the pins used for the EtherCAT ports are not connected and/or the functionality does not correspond to the ones of the Ethernet MAC module.
    Check the Table 11 Port...
  15. Replies
    1
    Views
    181

    Hi, These are two different memory address...

    Hi,

    These are two different memory address ranges overlayed into the same physical memory.

    Regards,
    Jesus
  16. Replies
    9
    Views
    383

    Hi, After the time expires the microcontroller...

    Hi,

    After the time expires the microcontroller goes into user mode where the debug interface is disabled. At this point you cannot get or modify the BMI using an external tool.

    Regards,
    Jesus
  17. Replies
    5
    Views
    358

    Hi, I cannot check right now, but maybe you...

    Hi,

    I cannot check right now, but maybe you could try:



    XMC_I2C_CH_SetInputSource(i2c->i2c, XMC_I2C_CH_INPUT_SDA, USIC_INPUT_ALWAYS_1);

    ...
  18. Replies
    2
    Views
    134

    Hi, Thanks for reporting the issue. We have...

    Hi,

    Thanks for reporting the issue.
    We have fixed and it will be included in the next XMCLib release.

    void XMC_HRPWM_HRC_ConfigSourceSelect1(XMC_HRPWM_HRC_t *const hrc, const...
  19. Hi, Have a look at...

    Hi,

    Have a look at http://git.savannah.nongnu.org/cgit/lwip/lwip-contrib.git/tree/apps?

    Regards,
    Jesus
  20. Hi, For the ports pins connected to the CCU4...

    Hi,

    For the ports pins connected to the CCU4 inputs, you will need to look into Table 12 Port I/O Functions of the data sheet,...
  21. Replies
    2
    Views
    389

    Hi, Can you try using only the USB debugger...

    Hi,

    Can you try using only the USB debugger connector?
    You should see the Power and Debug LEDs on.
    Update JLink to latest version, i.e. v6.80b...
  22. Replies
    9
    Views
    383

    Hi, Which value did you set to BMI.PINDIS? ...

    Hi,

    Which value did you set to BMI.PINDIS?
    Normally for ASC BSLTO you need to use BMI=0xFFD0, with BMI.PINDIS=1 so that Boot from BMI is selected.

    Regards,
    Jesus
  23. Replies
    1
    Views
    127

    Hi, Using the SDRAM interface of the EBU and...

    Hi,

    Using the SDRAM interface of the EBU and the ITM is not possible at the same time as you discovered.
    You could use the 16bit muxed mode of the EBU and the ADV signal to drive an external...
  24. Replies
    5
    Views
    358

    Hi, Can you try with the following sequence? ...

    Hi,

    Can you try with the following sequence?

    XMC_I2C_CH_ClearStatusFlag(i2c->i2c, XMC_I2C_CH_STATUS_FLAG_TRANSMIT_SHIFT_INDICATION);
    // Clear the bus by sending nine clock pulses
    ...
  25. Replies
    2
    Views
    259

    Hi, P0.14/P0.15 are used as SWDCLK/SWDIO for...

    Hi,

    P0.14/P0.15 are used as SWDCLK/SWDIO for debugging if the BMI is configured as SWD0.
    See...
Results 1 to 25 of 120
Page 1 of 5 1 2 3 4
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.