Search:

Hi dadairen1hao,

Concerning your found issue with MATLAB ComLib Interface, I can see that no Radar devices are connected to any COM Port or the COM Port is occupied so that the MATLAB Interface...

Hi ZiqZaq,

Yes, max detection speed value will be 20km/h as already available in current Radar GUI version...
System specification values will be updated in the P2G AN (max Speed to 20km/h).
...

Hi jmalberto,
If you want to download DAVE IDE use this link.
Just use Internet Explorer if you face issues with your browser.
BR, Montassar.

Hi,
If you want to download DAVE IDE use this link.
Otherwise, if you want to download Example Projects for DAVE™ Apps refer to this link.
Just use Internet Explorer if you face issues with your...

Hello ZiqZac,

Exactly. As already shown in the Figure above (see my first reply).

Cheers,
Montassar

Hi ZiqZac,

Exactly, the back of the board containing the antennas should face the intended target to detect.

Cheers,
Montassar.

Hello Dory,

Please find below answers to your questions:

1. Is the raw data a de-chirp signal?
Yes, it’s a down mix signal.

2. What is the sampling frequency for raw data?
Sampling...

Hi ZiqZac,

You are not wrong. The FW versioning is different from the whole package versioning...
FW version changes only when there is a change on the FW itself, otherwise package version...

Hello ZiqZac,

Can you please provide the following information:
- Which Radar GUI version are you using ?
- With which FW is the Position2Go board flashed ? You can read that in the status bar...

Hi Monika,

Please find below more details regarding your questions:

1. D2G_FW vs. D2G_Doppler
The Radar_D2G_FW project provides raw Radar ADC data, as an output, based on a configurable...

Hello Dory,

Yes, it is possible to read two radar data streams at one time, but there are some pitfalls.

In general the ComLib is capable to handle multiple connections at the same time, that’s...

Hi Fisher,

Please find below answers to your questions:
1. Please refer to the Target_Info_t struct listing the content of target data dealing with (elevation_speed, azimuth_speed, elevation)
2....

Hello Monika,

You can refer to the Application Note AN553: Position2Go DemoBoard, Section 3. System specifications.
Please note that the measured numbers are based on limited samples and are not...

Hi Monika,

Please refer to the folder IFX_D2G-HW-SW_V2.0.x\Firmware_Software\Binary, there you will find different .hex files for different FW configurations running on the P2G board.
You can use...

Hello purestarman,

Please find below explanations to your questions:

1. Within the D2G firmware project, the Host Communication library contains the USB interface on host communication protocol...

Hi emacar,

Radar GUI is now offering selection of multiple released stable versions.
You can choose the right version compatible with the FW version you are using.
Available Radar GUI versions...

Hi Drago627,

Please refer to the HW/Schematics/P2G_Schematics_V1.2.pdf file under the IFX_P2G-HW-SW_V1.0.2 package.
In order to get the P2G package, please download and install Infineon Toolbox,...

From in the P2G code you can see, how the data is packed into the transport buffer:
In function send_frame_data(…), in file EndpointRadarBase.c you can see that
• 1st the signals per Antenna are...

Hi,

Please refer to the 24GHz_Radar_Tools_and_Development_Environment_User_Manual
section 4.3 C radar system interface, which gives you more insight on how to use the provided ComLib_C_Interface...

Hi Kasr,

Please refer to the Section 4.4 UART radar system interface under the 24GHz Radar Tools and Development Environment User Manual
in order to get Sense2GoL raw data via UART interface to...

Hi Meni,

You can Trigger radar chirp, get the raw data using the following Matlab command:
[mxRawData, sInfo] = oRS.oEPRadarBase.get_frame_data; % get raw data
Otherwise, please refer to the...

Hi,

To deal only with ADC raw data, please use the D2G_FW Dave project, allowing Raw data acquisition based on Doppler and/ or FMCW modulation (configurable).
In order to change the...

Hi,

If you have more debug probes (more XMC LINK) that are connected in your PC through more USB interfaces you will get this pop-up message window.
This information indicates that you need to...

Hello,

In order to help you coming out with a fix to the issue you encountered, please provide the following details:

- XMC Flasher tool version ?
- Position2Go board HW version ?
- Did you...

Hi,

Please refer to the Position2Go Software User Manual Section 4.4 Power Saving.
to have enough insight on the duty-cycle feature. Otherwise, duty-cycle mode can be also enabled/disabled...