Search:

Type: Posts; User: Srivatsa

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Replies
    2
    Views
    416

    You can look at IR2010 and IRS2007 / IRS2008. ...

    You can look at IR2010 and IRS2007 / IRS2008.

    We also have a new family of gate drivers coming soon. You can contact your local Infineon Sales or FAE to provide you more information.
  2. For the datasheet rating, the internal Ron / Roff...

    For the datasheet rating, the internal Ron / Roff of the 2EDL23 is around 7 Ω and 5 Ω. This needs to be added to the external resistance of 1.8 Ω to arrive at the drive current in the given...
  3. Replies
    2
    Views
    1,064

    You try with a bulk capacitor of around 10 uF at...

    You try with a bulk capacitor of around 10 uF at the Vcc pin. This should make sure the 1A current limit of LM7815 is not tripped when the driver is switching the MOSFETs.

    Make sure the 10 uF...
  4. Replies
    1
    Views
    891

    As VBS is going down to 0 V the HO output is...

    As VBS is going down to 0 V the HO output is switching off. The recharging of the bootstrap capacitor is load dependent and 98% duty cycle is not helping.

    You can test with an isolated 12 V power...
  5. Replies
    1
    Views
    1,965

    Gate resistor calculations are explained in pages...

    Gate resistor calculations are explained in pages 17 to 19 of IR2214 datasheet.

    The power dissipation calculations are available at...
  6. Replies
    1
    Views
    1,353

    IS and ISM are the body diode characteristics of...

    IS and ISM are the body diode characteristics of a power MOSFET. They are not related to the gate driver IR2181.

    IR2181 datasheet is available at...
  7. Hi, when the EN pin is pulled low the output...

    Hi, when the EN pin is pulled low the output state of the gate driver will be in high impedance mode.
  8. Replies
    3
    Views
    2,152

    What is the deadtime between HIN and LIN? Try...

    What is the deadtime between HIN and LIN? Try with a delay between the two and with 50% duty cycle, LIN first and then HIN.
    Try removing the RC across the MOSFETs and the RC at the load L.
  9. Replies
    3
    Views
    2,152

    Hi, You can provide an initial value to the...

    Hi,

    You can provide an initial value to the bootstrap capacitors C17, C23 and check if the error is resolved.

    Thanks.
  10. Replies
    3
    Views
    3,642

    Yes. The IC biasing conditions including the VCC...

    Yes. The IC biasing conditions including the VCC should be met with the rectifier. See below application notes:
    ...
  11. All these can provide 2 A continuous drive...

    All these can provide 2 A continuous drive current. The 2ED - F2 will not be able to deliver 5 V since the undervoltage lockout of the secondary side is set at 12 V. Hence minimum the recommended...
  12. Replies
    3
    Views
    3,642

    The IRS2453D is a full bridge gate driver based...

    The IRS2453D is a full bridge gate driver based on the IR2153D self-oscillating half-bridge gate driver IC.
  13. Replies
    1
    Views
    3,208

    From the schematic it is a transformer as there...

    From the schematic it is a transformer as there is no need for energy storage.
  14. Replies
    4
    Views
    3,441

    They are arbitrary examples used to test at close...

    They are arbitrary examples used to test at close to 100 kHz switching frequency.

    Isolated gate drivers can go to 1 MHz, level-shift gate drivers are limited to around 300 kHz to 500 kHz as level...
  15. Replies
    4
    Views
    3,441

    The Electrical Characteristics table provides the...

    The Electrical Characteristics table provides the test condition for the Max. Oscillator Frequency as Ct = 1 nF and Rt = 7.43 kΩ giving 106 kHz. For the minimum recommended values of Ct = 330 pF and...
  16. Replies
    4
    Views
    6,675

    Hi Marcel, The complementary pair easily...

    Hi Marcel,

    The complementary pair easily provides fast turn on and turn off characteristics.

    Pls look here...
  17. Replies
    4
    Views
    6,675

    Hi Marcelo, The 1ED020I12-B2 has max driving...

    Hi Marcelo,

    The 1ED020I12-B2 has max driving current of 2 A and it cannot drive 3 FF200R12KT4 IGBTs on its own. It will need external booster stage as shown in page 11 here...
  18. Thread: 2ed21094s06j

    by Srivatsa
    Replies
    4
    Views
    5,669

    Hi Ajay, It's not clear to me where the...

    Hi Ajay,

    It's not clear to me where the Negative terminal of input power supply should be connected: The Negative power supply should be connected to the Vss (pin 5). Vss (pin 5) and COM (pin 6)...
  19. Replies
    3
    Views
    3,493

    Hi, Pls try with one of the below channels: ...

    Hi,

    Pls try with one of the below channels:

    https://www.infineon.com/cms/en/about-infineon/company/contacts/product-support-form/?redirId=56193

    Live Chat @...
  20. Replies
    3
    Views
    3,493

    Hi, As this is an automotive grade driver IC,...

    Hi,

    As this is an automotive grade driver IC, kindly contact your regional Infineon team for direct support.

    Thanks and regards,

    Srivatsa
  21. Thread: 2ed21094s06j

    by Srivatsa
    Replies
    4
    Views
    5,669

    Hi Ajay,. Thanks for using the 2ED21094S06J in...

    Hi Ajay,.

    Thanks for using the 2ED21094S06J in your design. Our answers are as below:

    Vcc (input power supply) is supply for both internal logic and low-side gate driver. Typical connection...
  22. Hi, Kindly contact your regional Infineon team...

    Hi,

    Kindly contact your regional Infineon team for support on the automotive grade gate driver - 1EBN1001AE.

    Thanks and regards,

    Srivatsa
  23. Replies
    1
    Views
    2,005

    Hi, The tool is available for download at...

    Hi,

    The tool is available for download at Bootstrap Capacitor Excel Tool.

    Best regards,

    Srivatsa
  24. Replies
    4
    Views
    2,061

    Few general guidelines: 1. Capacitor on Vcc...

    Few general guidelines:

    1. Capacitor on Vcc should be atleast 10 times capacitor on VB. Say Vcc cap = 10 uF, VB cap = 1 uF. This will ensure the bootstrap capacitor gets charged during transients....
  25. Replies
    5
    Views
    2,509

    Girish, BTN8982TA can operate upto 40 V only....

    Girish,

    BTN8982TA can operate upto 40 V only. I'm not familiar with IP76 rating. Guessing you meant IP67, you can start with calculating the power loss in each device. I believe you wont be using...
Results 1 to 25 of 59
Page 1 of 3 1 2 3
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.