infineon4engineers Facebook

infineon@google+ Google+

infineon@linkedin linkedin

infineon4engi@twitter twitter

infineon@youtube youtube

Search:

Type: Posts; User: cwunder

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    7
    Views
    6,214

    When you write to any special function register...

    When you write to any special function register (SFR) there are write attributes associated with them. For example do you need to be in supervisor or user mode and if it is a critical register it...
  2. You didn't say which AURIX device you are using? ...

    You didn't say which AURIX device you are using?

    You can check with Infineon but I believe this is a documentation oversight issue (meaning this bit doesn't exist for your device) as the...
  3. Is there something else you need as you have the...

    Is there something else you need as you have the API or a tooling command to accomplish the task at hand.

    The user's manual states the distribution of the OCDS documentation is restricted.
  4. Replies
    1
    Views
    78

    Please search the AURIX user's manual for Bit...

    Please search the AURIX user's manual for Bit Function Terminology

    rwh: As rw, but bit or bit field can be also set or reset by hardware.
    rh: This bit or bit field can be modified by hardware...
  5. Basically the Trace32 cannot connect to the...

    Basically the Trace32 cannot connect to the AURIX.

    Do you have any application code already in the device (PFlash) and is it otherwise functional? What is the level of the ESR0 signal?

    Some...
  6. For ease of use the AURIX has the capability to...

    For ease of use the AURIX has the capability to suspend the watchdogs when connected to a debugger (default setting). This is to avoid nuisance watchdog timeouts that will reset your system while you...
  7. Replies
    3
    Views
    202

    I would suggest to use the bifaces interface and...

    I would suggest to use the bifaces interface and change the configuration to point to the Tasking toolchain you are using. There are base projects for each device series which you can import into...
  8. Some comments: 1) The Watchdog timers only count...

    Some comments:
    1) The Watchdog timers only count up (they do not count down)
    2) The Watchdog timers are enabled by default after reset, however if you are connected to a debugger they are by...
  9. Replies
    15
    Views
    1,462

    This means it is using the interrupt vector table...

    This means it is using the interrupt vector table for CPU0. On TC399 you can have 6 CPUs meaning you can have 6 interrupt vector tables.
  10. Replies
    1
    Views
    134

    In the user's manual you can review the User...

    In the user's manual you can review the User Configuration Block options.



    For PFlash protection this is controlled by the UCB_PFlash. Within this UCB you have the option to protect the PFlash...
  11. Replies
    15
    Views
    1,462

    Do you mean HighTec EDV-Systeme GmbH? You open...

    Do you mean HighTec EDV-Systeme GmbH?

    You open an example project that uses interrupts.

    Basically you need to install the interrupt and then enable it. Here is a snippet that I did in the past...
  12. Replies
    3
    Views
    662

    Sorry that you had troubles: I did what to point...

    Sorry that you had troubles: I did what to point out that the user's manual does describe how the parity is being generated and used. From the users perspective you don't need to worry about it as it...
  13. Replies
    15
    Views
    1,462

    To create an interrupt entry it usually involves...

    To create an interrupt entry it usually involves two parts. You have to have a table defined in your linker/locator file and then you need to create the entry with a keyword or macro in a source file...
  14. Thread: Tc275 - gtm -

    by cwunder
    Replies
    2
    Views
    267

    Have you looked at section "25.22.2.1 Port to GTM...

    Have you looked at section "25.22.2.1 Port to GTM Control Registers"? Then for what is available at the TIMx look at Table 25-7x.
  15. Replies
    3
    Views
    428

    Each interrupt source is assigned a unique...

    Each interrupt source is assigned a unique interrupt priority number known as the Service Request Priority Number (SRPN). On receipt of an interrupt request from an interrupt source the SRPN is used...
  16. Replies
    15
    Views
    1,462

    The vector table is defined in the linker/locator...

    The vector table is defined in the linker/locator file. You add the interrupt function in your source code such that the linker can add the location of your ISR in the table. The TOS indicates which...
  17. Replies
    15
    Views
    1,462

    The interrupts all basically work the same and...

    The interrupts all basically work the same and follow the common definition of the Service Request Control Register (SRC). You need to choose the SRPN that matches the entry in the vector table. This...
  18. Replies
    15
    Views
    1,462

    Enclosed is the formula from the user's manual...

    Enclosed is the formula from the user's manual (TQ=0, Q=24, A=3,B=1 and C=3, fPER=200MHz):
    3948
  19. Replies
    15
    Views
    1,462

    Sorry but I have to comment that you are asking a...

    Sorry but I have to comment that you are asking a question without really giving enough information.

    Is this the crystal frequency? As usually the peripheral PLL is used (fPLL2) and typically...
  20. Replies
    1
    Views
    310

    When writing to the special function registers...

    When writing to the special function registers you need to check the access rights. The PDISC register has the following access rights SV, E, P. Which means you must be in supervisor mode, is CPU...
  21. It is hard to judge the difficulty you are...

    It is hard to judge the difficulty you are experiencing as everyone has a different background without knowing your issues? With TC297 this is the highest end device for the family however most...
  22. Replies
    1
    Views
    714

    Download the free trial of the Hightec or Tasking...

    Download the free trial of the Hightec or Tasking tool chains.
    Then sign up for an myICP account and then you can download the software frameworks and demos.
  23. Replies
    2
    Views
    678

    You could use 8-bit transfer and perform three of...

    You could use 8-bit transfer and perform three of them. If you keep the transmit buffer full it will look like one continuous transfer which means you can use the automatic chip select.
  24. Replies
    3
    Views
    662

    I am assuming your drawings are displaying the...

    I am assuming your drawings are displaying the LSB (parity) as the left most bit.

    The BACON.PARTYP = 0 defines EVEN parity. Your expected data is showing ODD parity (5 Ones).

    The AURIX is...
  25. The ECC on the PFlash is calculated over 256 data...

    The ECC on the PFlash is calculated over 256 data bits and the address bits. The data is stored in Flash with error correcting codes “ECC” in order to protect against data corruption.

    You should...
Results 1 to 25 of 91
Page 1 of 4 1 2 3 4
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.