Featured Discussions
Howdy y'all,
As the title implies, I was curious as to what the recommended torque was to secure the IPTC012N08NM5 to a heatsink? I couldn't find anything in the datasheet or any of the supplemental documentation on what the force should be.
Thanks
Show LessWe are using Tasking IDE on Aurix evaluation board. There’s a build in miniWiggler debugger. We can use this miniWiggler debugger to debug the code. We can set break points, stop at break points, evaluate variables at break points. However, one main feature is not working in all the PCs: we cannot do “step into”, “single step”, “step through” features. We must unset the break point in the current step and set a break point in the next step then hit “continue to run” to mimic the “single step” feature. Is that the problem with the debugger? Do j-link debugger work with Tasking IDE?
Thank you so much for your answer.
Show LessHi,
Looking at the latest ModusToolBox 3.2 I couldn't find an Ethercat Example for the board KIT_XMC48_RLX_ECAT_V2.1, is there any plan to port the Dave example to MTB as well?
Best Regards,
Marcelo Macedo - FAE at Neutronics
Show LessQuiero utilizar el modelo BTS5012.Quiero controla el encendido y apagado de distintas lámparas led y saber si este modelo es posible aplicarle un duty cycle del 50% en el pin IN atraves de un microcontrolador para atenuar la iluminación led .
Esta aplicación es segura para el buen funcionamiento del componente?
Show LessHello,
I have an older treadmill with a faulty mosfet. Can you recommend an alternate as I can't find the original part?
Transistor MOSFET F30U60DN H18
tx
K
Show LessHello Team,
I am LG India team,
we are using I2C driver provided by Infineon team to LG Korea team,
in I2C driver, Cy_SCB_I2C_SlaveGetReadTransferCount( ) is available which Returns the number of bytes read by the slave since the last time Cy_SCB_I2C_SlaveConfigReadBuf() is called.
we calling this function before Cy_SCB_I2C_SlaveConfigReadBuf().
but we found its not reading correct values.
could you test once share procedure to use.
Hello!
I have the following code that is not working. After first call of readRegister response is 0, after calling readRegister the second time, I receive the expected value.
Can you please help? I must mention that my application is based on the Infineon SPI_CPU_TC334 training and I've also tried to change spiMasterChannelConfig.channelBasedCs but I still don't receive the expected behavior.
I've also attached the source code for QSPI.
Thank you!
/**********************************************************************************************************************
* \file Cpu0_Main.c
* \copyright Copyright (C) Infineon Technologies AG 2019
*
* Use of this file is subject to the terms of use agreed between (i) you or the company in which ordinary course of
* business you are acting and (ii) Infineon Technologies AG or its licensees. If and as long as no such terms of use
* are agreed, use of this file is subject to following:
*
* Boost Software License - Version 1.0 - August 17th, 2003
*
* Permission is hereby granted, free of charge, to any person or organization obtaining a copy of the software and
* accompanying documentation covered by this license (the "Software") to use, reproduce, display, distribute, execute,
* and transmit the Software, and to prepare derivative works of the Software, and to permit third-parties to whom the
* Software is furnished to do so, all subject to the following:
*
* The copyright notices in the Software and this entire statement, including the above license grant, this restriction
* and the following disclaimer, must be included in all copies of the Software, in whole or in part, and all
* derivative works of the Software, unless such copies or derivative works are solely in the form of
* machine-executable object code generated by a source language processor.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
* WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL THE
* COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN
* CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*********************************************************************************************************************/
#include "Ifx_Types.h"
#include "IfxCpu.h"
#include "IfxScuWdt.h"
#include "QSPI_Config.h"
#include "Timers.h"
#define LED &MODULE_P00,5
IFX_ALIGN(4) IfxCpu_syncEvent g_cpuSyncEvent = 0;
volatile uint8 delay;
static unsigned char response = 0;
void core0_main(void)
{
IfxCpu_enableInterrupts();
/* !!WATCHDOG0 AND SAFETY WATCHDOG ARE DISABLED HERE!!
* Enable the watchdogs and service them periodically if it is required
*/
IfxScuWdt_disableCpuWatchdog(IfxScuWdt_getCpuWatchdogPassword());
IfxScuWdt_disableSafetyWatchdog(IfxScuWdt_getSafetyWatchdogPassword());
/* Wait for CPU sync event */
IfxCpu_emitEvent(&g_cpuSyncEvent);
IfxCpu_waitEvent(&g_cpuSyncEvent, 1);
//init1msTimer();
initQSPI2Master();
initQSPI2MasterChannel();
resetIMMU();
selfTestIMMU();
/*uint8 xGyro, yGyro, zGyro;*/
while(1)
{
response = readRegister(WHO_AM_I, 0x00);
// response = readRegister(WHO_AM_I, 0x00);
//readIMMUAxis(&xGyro, &yGyro, &zGyro);
}
}
Show Less
Hello,
As you can see in the attached document, “Bidirectional CLLC” is mentioned. I wonder that could you please send me the PLECS file OR could you please send me the document that shows how I can control CLLC when it is on the "forward and reverse mode conditions"?
Regards,
Mehmet
Show Less