Featured Discussions
HI
We have buy cypress miniprog4 to flash the PD controller (CYPD6127-48LQXIT).
We are able to turn on the target power by using the cypress programmer tool.
We have connect the device with the SWD interface and when we try to connect with the programmer we are facing below error:
Info : [CyBridge] Connected - MiniProg4 CMSIS-DAP BULK-1623198900212400
Info : Selected Device: MP4 BULK-1623198900212400
Info : Open On-Chip Debugger 0.10.0+dev-1.0.0.226 (2018-11-09-17:51)
Info : Licensed under GNU GPL v2
Info : For bug reports, read
Info : http://openocd.org/doc/doxygen/bugs.html
Info : /home/vvdn/Downloads/Cypress_programmer/CyProgrammer_2.0.0.355
Info : ./openocd
Info : /home/vvdn/Downloads/Cypress_programmer/CyProgrammer_2.0.0.355/BT
Info : 1623198900212400
Info : 3:7
Info : swd
Info : adapter speed: 1500 kHz
Info : cyp_detect_target.cfg
Warn : Transport "swd" was already selected
Info : cyp_get_mpn
Info : CMSIS-DAP: SWD Supported
Info : CMSIS-DAP: JTAG Supported
Info : CMSIS-DAP: FW Version = 2.0.0
Info : CMSIS-DAP: Interface Initialised (SWD)
Info : SWCLK/TCK = 1 SWDIO/TMS = 1 TDI = 1 TDO = 0 nTRST = 0 nRESET = 1
Info : CMSIS-DAP: Interface ready
Info : VTarget = 3.294 V
Info : clock speed 1500 kHz
Error: DAP 'test.cpu' initialization failed (check connection, power, etc.)
Please check and help to resolve this as we are not able to connect with the programmer.
Show LessFX3FirmwareSourceUserGuide.pdf
Win10 platform: this compilation source code has a recommended chain is there a version request
smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/%E8%B6%85%E9%AB%98%E9%80%9FUSB%E5%A4%96%E8%AE%BE/FX3-source-%E7%BC%96%E8%AF%91/td-p/724424
Show LessHello
When designing the state machine in GPIF designer I can not access to the thread number as shown in the attachment,
How I can solve this issue?
Thanks.
Show LessHello everyone ,
I want to use the IRPS5401 PMIC into one of my project to get multiple output rails of different voltages . The input power supply available for IRPS5401 PMIC is only 5V , but according to its data sheet the V supply pin needs 6V- 14V for , is there any way I could give it only 5V and run the IC efficiently or what if I put it NC ?
Hoping to get some real quick responses.
Show LessHello everyone!
I am trying to use Example bgt60tr13c with Matlab 2017b. I have some problem when use demo:
>> MatlabWrapperExample
Incompatible MEX-file 'D:\Infineon\radar_sdk\libs\win32_x64\DeviceControlM.mexw64': Loading MEX file built by R2021b is not supported for this release.
Error in RadarDevice.get_version_full (line 187)
[ec, version] = DeviceControlM('get_version_full');
Error in MatlabWrapperExample (line 39)
disp(['Radar SDK Version: ' RadarDevice.get_version_full()]);
And when I try to build DeviceControlM.c:
>> mex -v CC=g++ -O -DSNPRINTF=snprintf -I'D:\Infineon\radar_sdk\sdk\c\' DeviceControlM.c
Error using mex
D:\Infineon\radar_sdk\sdk\matlab\RadarSDKMEXWrapper\DeviceControlM.c:56:46: fatal error: ../ContextWrapper/MWrapHelpers.h: No such file or directory
compilation terminated.
Could someone please help me resolve this error?
Show Lessin TC38x,Can the local memory unit(LMU) and thre Distributed LMU (DLMU) as a whole LMU to be used in OVC function SAL-TC387QP-160F300S AD
Show Lesswhen try to debug the example project through miniwiggler, it can not work as below:
but memtool can connect the chip :
MCD basic client can also connect the chip and get the information:
the ADS version is 1.9.20 ,DAS version is 8.0, miniwiggler is V3.1, hardware board is designed by other people and can be connected through UDE/pls
Show Less