Featured Discussions
Hello
When designing the state machine in GPIF designer I can not access to the thread number as shown in the attachment,
How I can solve this issue?
Thanks.
Show LessHello everyone ,
I want to use the IRPS5401 PMIC into one of my project to get multiple output rails of different voltages . The input power supply available for IRPS5401 PMIC is only 5V , but according to its data sheet the V supply pin needs 6V- 14V for , is there any way I could give it only 5V and run the IC efficiently or what if I put it NC ?
Hoping to get some real quick responses.
Show LessHello everyone!
I am trying to use Example bgt60tr13c with Matlab 2017b. I have some problem when use demo:
>> MatlabWrapperExample
Incompatible MEX-file 'D:\Infineon\radar_sdk\libs\win32_x64\DeviceControlM.mexw64': Loading MEX file built by R2021b is not supported for this release.
Error in RadarDevice.get_version_full (line 187)
[ec, version] = DeviceControlM('get_version_full');
Error in MatlabWrapperExample (line 39)
disp(['Radar SDK Version: ' RadarDevice.get_version_full()]);
And when I try to build DeviceControlM.c:
>> mex -v CC=g++ -O -DSNPRINTF=snprintf -I'D:\Infineon\radar_sdk\sdk\c\' DeviceControlM.c
Error using mex
D:\Infineon\radar_sdk\sdk\matlab\RadarSDKMEXWrapper\DeviceControlM.c:56:46: fatal error: ../ContextWrapper/MWrapHelpers.h: No such file or directory
compilation terminated.
Could someone please help me resolve this error?
Show Lessin TC38x,Can the local memory unit(LMU) and thre Distributed LMU (DLMU) as a whole LMU to be used in OVC function SAL-TC387QP-160F300S AD
Show Lesswhen try to debug the example project through miniwiggler, it can not work as below:
but memtool can connect the chip :
MCD basic client can also connect the chip and get the information:
the ADS version is 1.9.20 ,DAS version is 8.0, miniwiggler is V3.1, hardware board is designed by other people and can be connected through UDE/pls
Show Less
Dear team need to understand why the upper limit for overtemperature is locked?
Also please confirm if there is any sample code for handling overtemperature
Show Less
Dear Forum:
I know that
The Hex file generated by the Modus Tool box IDE follows the Intel Hex File format which is supported by the Cypress Programmer.
from the following title.
https://community.infineon.com/t5/PSoC-6/PSoC-programmer-parsing-failure/td-p/716946
I want to confirm that
Which IDE can generate hex file used by PSoC programmer?
Thank you.
Show LessHello,
I want to read the 1YN Bluetooth transmit power and write to it. How can I do this with the `hcitool`?
I'm using CYW4343A2_001.003.016.0031.0000.1YN.hcd firmware.
As far as I know CYW43439 has a maximum TX power of 8dB. If so is the following output wrong?
# hcitool -i hci0 cmd 0x08 0x004b
LE Read Transmit Power (0x08|0x004b) ncmd 1
Status: Success (0x00)
Min Tx power: -16 dBm
Max Tx power: 12 dBm
Thanks for all the help,
Mesih
Show Less