Welcome to the Infineon Developer Community

Hi,

I want to translate the following article. Please confirm to my work.
URL: https://community.infineon.com/t5/Knowledge-Base-Articles/How-can-uIO-Stick-user-program-readout-into-from-data-flash-area/ta-p/683553

Best Regards

Hi,

I want to translate the following article. Please confirm to my work.
URL: https://community.infineon.com/t5/Knowledge-Base-Articles/How-to-Renew-MOTIX-TLE987x-Motor-Control-F...

Best Regards

we are trying to re flash the Micro Via MODUS tool .it is getting heat while flashing after 60% completed. and our tool shows power interrupt .

Error Image from our flashing tool:

please support to resolve this issue. we are struggling to Re flash the Micro . kindly share your input to resolve the issue.

Hi,

I want to translate the following article. Please confirm to my work.
URL: https://community.infineon.com/t5/Knowledge-Base-Articles/How-to-Renew-MOTIX-TLE987x-Motor-Control-FOC-Demo-License/ta-p/682109

Best Regards

Hi,

I want to translate the following article. Please confirm to my work.
URL: https://community.infineon.com/t5/Knowledge-Base-Articles/Can-a-single-ceramic-cap-be-used-for-VDDP-and-VDDC-outputs-in-TLE9844/ta-p/682100

Best Regards

Hi,

Does this controller have a internal temperature sensor? I would like to clarify this because  the CCG3 Tecnical Reference manual says

The 8-bit ADC is used for generic voltage sensing of anything connected to the analog mux (AMUX buses, as well as voltage supply measurement and temperature sensing.

Also SDK has some references to ADC temperature sensing.

/*
 * ADC1 SAR Control Register
 * General Purpose voltgae measurement, Temperature Sceining
 */
#define PDSS_ADC1_SAR_CTRL_ADDRESS                          (0x400a01a0)
#define PDSS_ADC1_SAR_CTRL                                  (*(volatile uint32_t *)(0x400a01a0))
#define PDSS_ADC1_SAR_CTRL_DEFAULT                          (0x00008000)

Is there a internal sensor or are these just referring to a some external sensor like NTC thermistor connected to a pin and muxed to ADC?

Thanks!

Hello,

I'm running MTB 3.2 GUI in Ubuntu 22.04.4 LTS and building the Security_App PSoC6 example for the Prototyping Kit (CY8CPROTO-062-4343W).

After creating the default Security_App example, I added the emeeprom (v2.20.0) component, so as to read/write settings to the PSoC6 32kB Auxilliary Flash.  I copied the code from Emeeprom's README.md

https://infineon.github.io/emeeprom/em_eeprom_api_reference_manual/html/index.html#section_em_eeprom_quick_start

And added a line CY_SECTION(".cy_em_eeprom") , so that emEepromStorage will be kept in the 32kB Auxilliary Flash.

However, the code failed to compile:

/opt/Tools/ModusToolbox/tools_3.2/cymcuelftool-1.0/bin/cymcuelftool --merge ../proj_cm0p/build/APP_CY8CPROTO-062-4343W/Debug/proj_cm0p.elf ./build/BOOT/APP_CY8CPROTO-062-4343W/Debug/proj_cm4.elf --output ./build/BOOT/APP_CY8CPROTO-062-4343W/Debug/primary_app.elf --hex ./build/BOOT/APP_CY8CPROTO-062-4343W/Debug/primary_app.hex; cp -f ./build/BOOT/APP_CY8CPROTO-062-4343W/Debug/primary_app.hex ./build/BOOT/APP_CY8CPROTO-062-4343W/Debug/primary_app_BOOT_raw.hex; rm -f ./build/BOOT/APP_CY8CPROTO-062-4343W/Debug/primary_app.hex; /opt/Tools/ModusToolbox/tools_3.2/gcc/bin/arm-none-eabi-objcopy --change-addresses=0 -O ihex ./build/BOOT/APP_CY8CPROTO-062-4343W/Debug/primary_app.elf ./build/BOOT/APP_CY8CPROTO-062-4343W/Debug/primary_app_BOOT_unsigned.hex; ../../mtb_shared/core-make/release-v3.3.1/make/scripts/python3.bash ../../mtb_shared/mcuboot/v1.8.1-cypress/scripts/imgtool.py sign --header-size 0x400 --pad-header --align 8 -v 1.0.0 -S 917504 -M 1792 --overwrite-only -R 0 -k ../proj_btldr_cm0p/keys/cypress-test-ec-p256.pem ./build/BOOT/APP_CY8CPROTO-062-4343W/Debug/primary_app_BOOT_unsigned.hex ./build/BOOT/APP_CY8CPROTO-062-4343W/Debug/primary_app.hex; cp -f ./build/BOOT/APP_CY8CPROTO-062-4343W/Debug/primary_app.hex ./build/BOOT/APP_CY8CPROTO-062-4343W/Debug/primary_app_BOOT.hex;
No ELF section .cychecksum found, creating one
Application checksum calculated and stored in ELF section .cychecksum
No ELF section .cymeta found, creating one
Checksum calculated and stored in ELF section .cymeta
Usage: imgtool.py sign [OPTIONS] INFILE OUTFILE
Try 'imgtool.py sign -h' for help.

Error: Image size (0x3fe0896) + trailer (0x20) exceeds requested size 0xe0000

make[1]: Leaving directory '/home/ub2204/work/psoc/tansiowk_mtw_3_1/Security_App_Emeeprom/proj_cm4'
cp: cannot stat './build/BOOT/APP_CY8CPROTO-062-4343W/Debug/primary_app.hex': No such file or directory
make[2]: *** [../../mtb_shared/core-make/release-v3.3.1/make/core/bwc.mk:161: _mtb_build__legacy_project_postbuild] Error 1
make[1]: *** [../../mtb_shared/core-make/release-v3.3.1/make/core/main.mk:385: secondstage_build] Error 2
make: *** [/opt/Tools/ModusToolbox/tools_3.2/make/application.mk:72: build] Error 2
"/opt/Tools/ModusToolbox/tools_3.2/modus-shell/bin/make CY_MAKE_IDE=eclipse CY_IDE_TOOLS_DIR=/opt/Tools/ModusToolbox/tools_3.2 CY_IDE_BT_TOOLS_DIR= -j6 all" terminated with exit code 2. Build might be incomplete.

I have attached the code, build error log and map file.

Thanks for any advice!

BR,

SK

Hi, I tried to implement the mtb-littlefs in my xmc7100D board  with few modification to mq serial-read/write program: But I am encountering an error: could you tell me why I am unable to do "

"

My COM Port:

in my lfs.c:

lfs_ssize_t lfs_file_read(lfs_t *lfs, lfs_file_t *file,
        void *buffer, lfs_size_t size) {
    int err = LFS_LOCK(lfs->cfg);
    if (err) {
        return err;
    }
    LFS_TRACE("lfs_file_read(%p, %p, %p, %"PRIu32")",
            (void*)lfs, (void*)file, buffer, size);
    printf("lfs_file_read(%p, %p, %p, %"PRIu32")",
                (void*)lfs, (void*)file, buffer, size);
    LFS_ASSERT(lfs_mlist_isopen(lfs->mlist, (struct lfs_mlist*)file));

    lfs_ssize_t res = lfs_file_rawread(lfs, file, buffer, size);

    LFS_TRACE("lfs_file_read -> %"PRId32, res);
    LFS_UNLOCK(lfs->cfg);
    return res;
}

How do I solve the LS_ASSERT function from failing?

Also how do I verify little_fs is not mounted on the internal flash but on the inbuild external flash memory.

Best,

PrasadA

您好，我在使用xmc4800，ethercat。这个示例代码ETHCAT_SSC_AUT_BASE_XMC48里添加PMSM_FOC组件，报了两个错误，我在单独使用PMSM_FOC这个工程正常编译运行。但在ETHCAT_SSC_AUT_BASE_XMC48就会出现这两个问题，请看附件图

多次尝试无法解决，请帮看一下。感谢！！！

Hi 

I want to know  sleep current of TLE9853QX & also it auto wake when LIN signal is available. My customer is using in Flush door handle.

I have seen multiple sleep mode specs available in datasheet  but not able to understand actual avg sleep mode current required.

Regards

Lucky Kumar