Featured Discussions
Hi Expertises,
In TLE9012 DQU chapter 17 mentioned that "Cell voltage supervision warning flags CELL_UV_DAC_COMP" and "Cell voltage supervision warning flags CELL_OV_DAC_COMP" can detect overvoltage and undervoltage. Is it the same as cell_UV and cell_OV?
Where could I find more details for CELL_UV_DAC_COMP and CELL_OV_DAC_COMP? Would someone explain that how to operate and set?
Thanks
Show Less1.请问我在官网上看到了,伺服电机的方案。
2.请问这个方案是否开放?
3.如果开放能获得那些资料。
Whitepaper_CoolSiC™ – The_perfect_solution_for_servo_drives_EN (infineon.com)
Show Lesshi
i want to use the SCR in order to reduce the power consumption , and meet some block point. please check state flow bellowing :
if SW switch to SCR domain to execute, which position will sw execute next after wake up source login and exit from SCR domain ?
Step A (step A as the SW first code after reset )? or back to Step B?
Show Less
Hi,
I use the XMC4500F144K1024 chip as the main chip, and connect the TJAG download port of the slave ESP32 chip to the SPI pin of that chip. Is it feasible to use software to simulate SPI as a JTAG function and burn the program into the ESP32 chip? Is there any reference code or case for similar requirements that can be used for reference?
Thanks.
Show LessDear Infineon
I want to translate the following KBA, please confirm to my work.
Are the CAN FD transceivers capable of classical C... - Infineon Developer Community
Best Regards,
Ryu
Show LessHi team, I wanted to confirm whether the below EVM board is compatible for CY8CPROTO-063-BLE kit. If not can you share the correct EVM board details.
CY8CPROTO-063-BLE - Infineon Technologies
Thankyou
Hey all, i've been trying to get a YUV2 demo to work on the FX3's memory, so far i've successfully modified the MJPEG demo to output a 96x96 yuv2 image, and on windows the camera preview does work (i see my 4 frame sample), but starting a stream does not work properly and crashes the app.
When running this on linux, it does not work at all, v4L2 reports:
VIDIOC_STREAMON returned -1 (Input/output error)
Looking at wireshark, the ONLY difference i can spot between MJPEG and YUV2 (besides the config change in the format and frame descriptors obviously) are a wrong bAlternate setting requested by the host to the FX3 when the YUV2 fw is loaded, which causes the isochronous stream to never start:
This should be 1 instead, like in this mjpeg capture of the same command which does start streaming:
This causes an issue with this peice of code and never starts the stream:
/* Start the video stream if the streaming interface has been selected. */
if ((interface == CY_FX_UVC_INTERFACE_VS) && (altSetting != 0))
{
CyU3PDebugPrint (4, "STARTS\r\n", evtype);
CyFxUVCApplnStart ();
}
break;
I've attached the wireshark log for both the usb descriptors, to show that their endpoint configs are the exact same (attached as C files because the forum doesn't take .txt), besides cyfxuvcdscr.c and the frames themselves nothing has been modified from the sample. I'm on the latest version of the SDK and the working mjpeg demo has been compiled on the same sdk as the non working one.
Any clue as to why this might be occuring?
Hello,
I am investigating possibilities to use FlexRay (E-Ray) message RAM for the custom debug purposes, as FlexRay communication will not be needed.
Can it be accessed directly by the CPU core? If yes, what would be the starting address of the Message RAM?
Controller I am using is AURIX TC36x (SAK-TC364DP-64F300F AA).
Thanks for your support,
BR,
Djordje