Featured Discussions
Dear Infineon
I want to translate the following KBA, please confirm to my work.
Are the CAN FD transceivers capable of classical C... - Infineon Developer Community
Best Regards,
Ryu
Show LessHi team, I wanted to confirm whether the below EVM board is compatible for CY8CPROTO-063-BLE kit. If not can you share the correct EVM board details.
CY8CPROTO-063-BLE - Infineon Technologies
Thankyou
Hey all, i've been trying to get a YUV2 demo to work on the FX3's memory, so far i've successfully modified the MJPEG demo to output a 96x96 yuv2 image, and on windows the camera preview does work (i see my 4 frame sample), but starting a stream does not work properly and crashes the app.
When running this on linux, it does not work at all, v4L2 reports:
VIDIOC_STREAMON returned -1 (Input/output error)
Looking at wireshark, the ONLY difference i can spot between MJPEG and YUV2 (besides the config change in the format and frame descriptors obviously) are a wrong bAlternate setting requested by the host to the FX3 when the YUV2 fw is loaded, which causes the isochronous stream to never start:
This should be 1 instead, like in this mjpeg capture of the same command which does start streaming:
This causes an issue with this peice of code and never starts the stream:
/* Start the video stream if the streaming interface has been selected. */
if ((interface == CY_FX_UVC_INTERFACE_VS) && (altSetting != 0))
{
CyU3PDebugPrint (4, "STARTS\r\n", evtype);
CyFxUVCApplnStart ();
}
break;
I've attached the wireshark log for both the usb descriptors, to show that their endpoint configs are the exact same (attached as C files because the forum doesn't take .txt), besides cyfxuvcdscr.c and the frames themselves nothing has been modified from the sample. I'm on the latest version of the SDK and the working mjpeg demo has been compiled on the same sdk as the non working one.
Any clue as to why this might be occuring?
Hello,
I am investigating possibilities to use FlexRay (E-Ray) message RAM for the custom debug purposes, as FlexRay communication will not be needed.
Can it be accessed directly by the CPU core? If yes, what would be the starting address of the Message RAM?
Controller I am using is AURIX TC36x (SAK-TC364DP-64F300F AA).
Thanks for your support,
BR,
Djordje
1. Whether to use ADC or comparator for counter electromotive force
2. Is it only necessary to change the pole pair number to change the motor?
smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/MOTIX-MCU/motix-%E5%8F%8D%E7%94%B5%E5%8A%A8%E5%8A%BF-BLDC-BC-BEMF-EXAMPLE-TLE987X/td-p/744904
Show LessI AM Trying to Install this ezusbfx3sdk_1.3.5_Windows_x32-x64.exe in my Pc. But it throws an Error showing MICROSOFT.NET version should be above 3.5 or 4 even though my current version is 4.0 .please guide me for the installation of this sdk exe.Mention below is the error which it shows during Installation.
And mentioned below is my Microsoft.NET Framework verion .
so please guide us in the process of installation of the skd it would be very greatful.
Thanks & Regard's
syed.
Show Less