Welcome to the Infineon Developer Community

Hello,

I am facing an issue while writing data to the DFlash memory region. I am using the TC375 Flash programming Example code with some changes. Below is the scenario for which I am facing the issue.

1. The first time writing data (0xAF000400) to the address 0xAF000240 is writing successfully.

2. reading data from 0xAF000240 reading successfully.

3. If I write the data that is read from 0xAF000240 to the same address by updating the data with some other value, the memory(0xAF000240) is filling with zeros (0x00000000).

Can any one please suggest the solution. 

Thank you very much !

Dear Infineon support Team,

I want to replace BTS442 E2 by BTS441RG in one of our products and have following questions:

Most critical for us is the lower maximum allowed Vbb (abs.max) which is 63V for BTS442 and only 43V for BTS441. 

The datasheet of the BTS441RG recommends for overvoltage protections 150 Ohm between BTS441.GND and Signal GND.  I would like to implement these 150 Ohm but am wondering, if there are any further informations about this replacement:

1) do you have some further informations about replacing BTS442 E2 by BTS441RG not written in the datasheet?

2) Any drawbacks i might currently not be aware of using the 150 Ohm resistor for OV protection as proposed in datasheet?

3) is there a LTspice model for BTS441RG available? For example the BTS436L2G has one on your homepage.

Thank you very much in advance for your support!

Best regards,

Bastian

A method of analyzing English Premier League odds accurately like no other

The method of analyzing bookmaker reviews uk odds is attracting thousands of betting enthusiasts' attention. Many punters have brought home substantial profits from betting on this league. Therefore, this article is intended for those who are inexperienced in analyzing odds, providing them with a foundation to make successful bets. Follow this article to not miss out on any golden betting opportunities!

I. Basic Information about the English Premier League

Many players participate in betting on the English Premier League, yet their understanding of it remains vague. To have a foolproof method of analyzing English Premier League odds, one must understand the nature of this league. What are the characteristics of analyzing odds here? Football betting experts will help you achieve that.

What is English Premier League Betting?

In simple terms, English Premier League betting refers to betting on football matches before they take place in the Premier League. The odds for this type of bet depend not only on the match but also on the bookmakers.

>> See more: Summary of betting site nigeria that give bonuses to new participants

Currently, the English Premier League is becoming a popular destination for betting sites. Especially in Vietnam, betting sites pay close attention to this top league. This is also the league that betting experts focus on and recommend people to participate in. Among the popular leagues today, the English Premier League is considered the most heavily participated in.

Prominent Features of the English Premier League

The English Premier League generates enormous revenue, mainly from television rights and advertising services. Because of these advantages, it has become the focal point for most experts in football betting.

All teams have relatively equal strength and combine with a spirited competitive spirit. It is for this reason that players need to carefully consider before deciding on their betting choices. Depending on the match, the characteristics and rules of the game may vary.

The English Premier League has a distinctive feature in the way points are calculated. Thirty-eight rounds of matches correspond to 20 teams. The team with the highest points after the final match is the champion. Similarly, if three teams are at the bottom of the standings, they will not be eligible to participate in the next season.

According to experts on analyzing English Premier League odds, this is the most attractive league in the world. Therefore, the number of participants is enthusiastic and actively betting.

In addition, this is a league that is very difficult to predict the score, especially in the first third and the end of the season. Remember this point to place accurate bets!

II. The Most Accurate Method of Analyzing English Premier League Odds

To participate in betting on the English Premier League, without a little "trick," it will be difficult to win bets. Effective methods will be shared by bongdaso1 for you right here:

Analyzing Odds Based on Match Time

This is a method of analyzing English Premier League odds that many bettors choose.

As mentioned above, before and after the first third of the season, matches often experience fluctuations. Therefore, this is a time when you should avoid betting. Therefore, from August to November is the golden time for you to make betting moves.

Analyzing Odds Based on League Standings

The end of the season is when the winning team's dominance becomes apparent. However, football is a sport bookmaker that always has fluctuations and surprises. Not necessarily the stronger team will win. Therefore, you should quickly seize the opportunity to place bets when you notice the bottom team actively outperforms the strong team.

Analyzing Odds Based on the Performance of Both Teams

One of the methods of analyzing English Premier League odds used by bettors is based on the past achievements of both teams.

Before placing bets, you should consider the results, the situation, and related factors in previous matches. This is not useless at all because it helps you have a more objective view. From there, you can make the most accurate final decision.

Analyzing Odds Based on the Teams' Current Form

Analyzing English Premier League odds always involves many fluctuations. Therefore, luck is an unpredictable factor.

However, statistics are an equally important factor. This helps you analyze the form of each team and each player. In the match, the better the form of the team, the higher the chance of winning. At the same time, paying attention to the goal difference of the playing teams is extremely important.

In particular, the form of the match depends a lot on the players. If the players have experience and talent, it will lead to positive outcomes for the match. When choosing a betting team, you should find out if that team has any formidable players? Who is their coach, how are their management skills?... These are not redundant factors that determine the strength of the team.

Therefore, to win bets, you need to observe and have a general view to make the most accurate assessments.

III. Choosing a Bookmaker's Influence When Analyzing English Premier League Odds

When analyzing football betting odds, you only care about the method of analyzing English Premier League odds. However, if you do so, there will still be many shortcomings. Choosing a reputable bookmaker is one of the most important factors. Experts will show you how to choose a reputable bookmaker.

Number of Football Betting Odds

This is a factor that you need to grasp, which is very important. The bookmaker that has a higher odds rate is the one you should choose. However, more importantly, you need to find a reliable address to avoid being deceived.

If the bookmaker offers many types of betting odds, that bookmaker guarantees consistency in the league. Conversely, small or low-quality bookmakers often offer very few betting odds.

Betting Odds Rate

As mentioned above, analyzing English Premier League odds requires you to pay attention to the betting odds rate. It's needless to mention this, and you must have realized it. Playing betting to have fun is less common, but players also somewhat expect luck to come to them. Therefore, choose a place with a high betting odds rate.

Players at bookmakers with high betting odds rates also do not have to worry too much. Because when this happens, it means that the address focuses on attracting customers with a huge account.

In summary, we still have advice for you. In today's betting market, there are many addresses with high betting odds rates. However, when players win bets, they run away. That is a scam address. You need to consider and research carefully!

Above are all the methods of analyzing English Premier League odds that we highly appreciate. Hopefully, it will help you when betting on this league. If you find the article meaningful, don't forget to share it with everyone to read!

Hello all,

I'm using the TLI49d-W2BW with a Raspberry Pi4,
I started with a code found on another thread in the forum, thanks to @Yashraj_P .

And it worked quite nicely during a long time.

But I'm having slight problems nowadays :
The sensor is working properly and I'm reading the values (Bx, By, Bz) of the sensor during an hour or more (values arriving each 20seconds),
And suddently the read values are not changing anymore, and I read Bx=-1, By=-1, Bz=-1
With or without a magnet around.

First is :

def initialize(self):
        # Enabling One-byte read, Clock Stretching enabled, /INT disabled, Master Controlled Mode
        self.pi.i2c_write_byte_data(self.h, 0x11, 0x15)
        # Temp enabled, Bz measure enabled, ADC trigger on reading after 0x05 register
        self.pi.i2c_write_byte_data(self.h, 0x10, 0x20)
        sleep(60e-6)
        self.update_data()

Then :

def update_data(self):
        (count, self.data) = self.pi.i2c_read_device(self.h, 6)

def get_x(self):
        self.bx = (self.data[0] << 4) | ((self.data[4] >> 4) & 0x0f)
        if self.bx > 2047:
            self.bx -= 4096
        # self.bx *= 0.098
        return self.bx

I tried few things and realised that when I'm launching my software, 
I'm in fact "initializing" the sensor to write the configuration to the register,
And later on when reading (clicking on a button or automatically during a sequence) the values, well I'm just reading them.

Once I have Bx=-1, By=-1, Bz=-1,
I quit the program and relaunch it then it works fine.
So the problem should be with the iniatilazion at that point ?
So now I have fixed the problem by initiazing the sensor every time before reading the values,
But I'm wondering if it really should be like this 🤔

Doeas anybody had a problem of the same kind ?
Did I miss something somewhere ?

Thanks a lot for the reading time,
A good day to all.
Bastien

Hello, I need to know the correct part number associated to ordering code SP005591068.

BTS409L1E3062AA or BTS409L1E3062AB ?

Thanks.

Best Regards

Hi Infineon team,

      In some of our designs we use the SAK-C167CR-LM-HA+ microcontroller. Can we use SAF- C167CR-LM in place of it?

Are SAK-C167CR-LM-HA+ and SAF- C167CR-LM functionally equivalent? On page 59 of the datasheet, I can see that ambient temperature rating is different between SAK and SAF prefixes. Other than this are there any differences? What does the "HA+" stand for?

Thank you.

Regards,

Abhijeet B

我们这边使用BLE（CYW20829）作为SPI slave和MCU（TC387）作为SPI master，调试SPI通信时，遇到两个问题：

1.slave接收来自master的数据，rx中断不触发。

SPI初始化如下：

代码段参考：https://infineon.github.io/psoc6hal/html/group__group__hal__spi.html文档中的Snippet 4:Interrupts on SPI events

代码修改基于例程：https://github.com/Infineon/mtb-example-hal-spi-slave#readme

尝试：调试过程中发现，slave使用cyhal_spi_slave_write时，rx中断正常触发，看代码该函数调用了cyhal_spi_transfer_async

问题：只有slave一直调用cyhal_spi_transfer_async进行读/写操作，rx中断才正常触发？

解决方案：有没有配置可以让master写入数据时，slave就触发SPI rx中断？

2.slave使用函数cyhal_spi_slave_write向master发送数据时，没有等待master拉低片选并生成时钟信号，导致接收数据异常。

尝试：使用Cy_GPIO_Read读取CS引脚，直到该引脚被拉低。

问题：容易死循环，读取引脚数据一直为高电平。

解决方案1：能否帮忙调试出一个该方案可行的代码？

解决方案2：是否有其他slave write函数，是等待master拉低片选并生成时钟信号，才发送数据？

希望能给出上述问题的解决方案。

Hi,

I would like to test the bluetooth connection for cyw43439.

Currently the wifi sdio is working as expected as both STA and AP.

However, I could not get it recognized as a bluetooth device on my host.

I'm using and arm-32 based soc which is Ambarella s3lm board as my host. Currently, I've connected the UART pin to the host (CTS, RTS, Tx, Rx).

These are my output of the hci dev, no bluetooth device was listed.

# hcitool dev
Devices:
[ 51.908670] Bluetooth: Core ver 2.22
[ 51.914488] NET: Registered PF_BLUETOOTH protocol family
[ 51.919833] Bluetooth: HCI device and connection manager initialized
[ 51.926305] Bluetooth: HCI socket layer initialized
[ 51.931197] Bluetooth: L2CAP socket layer initialized
[ 51.936332] Bluetooth: SCO socket layer initialized

Nothing on my device list as well.

# ls /dev/
amb_gadget mem random tty3 tty57
amb_iris mtd0 rfkill tty30 tty58
amb_lens mtd0ro rtc0 tty31 tty59
ambac mtd1 shm tty32 tty6
ambad mtd1ro snapshot tty33 tty60
block mtd2 snd tty34 tty61
bus mtd2ro tty tty35 tty62
char mtd3 tty0 tty36 tty63
console mtd3ro tty1 tty37 tty7
dsplog mtd4 tty10 tty38 tty8
eis mtd4ro tty11 tty39 tty9
fdet mtd5 tty12 tty4 ttyS0
full mtd5ro tty13 tty40 ubi0
gpiochip0 mtd6 tty14 tty41 ubi0_0
gpiochip1 mtd6ro tty15 tty42 ubi_ctrl
i2c-0 mtd7 tty16 tty43 ucode
i2c-1 mtd7ro tty17 tty44 urandom
i2c-2 mtdblock0 tty18 tty45 vcs
iav mtdblock1 tty19 tty46 vcs1
input mtdblock2 tty2 tty47 vcsa
kmsg mtdblock3 tty20 tty48 vcsa1
loop-control mtdblock4 tty21 tty49 vcsu
loop0 mtdblock5 tty22 tty5 vcsu1
loop1 mtdblock6 tty23 tty50 watchdog
loop2 mtdblock7 tty24 tty51 watchdog0
loop3 null tty25 tty52 zero
loop4 overlay tty26 tty53
loop5 ptmx tty27 tty54
loop6 pts tty28 tty55
loop7 ram0 tty29 tty56

I'm currently using the cywfmac backport driver for linux kernel 6.1 (murata hedorah branch)

Note that my host is using the BlueZ stack.

Any other configuration is required to enable this?

Please advise.