Welcome to the Infineon Developer Community

Ti gave a link to Cypress telling to download the driver, the link is as follows

https://community.cypress.com/docs/DOC-12366 but the link says it's archived and can't be downloaded

The normal FX 3 driver won't work again, can you share this driver with me?

smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/USB-EZ-PD-Type-C/%E5%AF%BB%E6%89%BE%E9%80%82%E9%85%8DTi%E7%9A%84%E9%A9%B1%E5%8A%A8/td-p/741911

Hi, I am using the ICE2HS01G in a high voltage application.

Sometimes, the IC does not go into burst mode and keeps switching continuously even with the LOAD pin pulled down to ~0V by the feedback control based on the TL431 IC.

Is this a reported issue with noise, perhaps  on the Vsense line?

Thanks,

SS1

Hello,

I am looking for the Firmware project (Eclipse Project) for the OV7251 Image Sensor. Even a simple implementation that offers the following functionalities will be sufficient:

- UVC-compliant output

- 640x480 pixel resolution

- Raw video

Does anyone have a project that can be shared?

Thanks in advance,

Mo

Hi,

I am programming the IR35204 Chip.

Loop1 Vout is successfully shown our setting.

But Loop2 Vout has a low level and looks like a noise. 

is there  a any solution about Loop2 Operation successfully? 

Please Let me know

Thank you for your help 

Hi,

I want to translate the following article to Japanese. Please confirm to my work.
KBA "Where to check when there are errors changing Build Configuration from Release to Debug"
URL: https://community.infineon.com/t5/Knowledge-Base-Articles/Where-to-check-when-there-are-errors-changing-Build-Configuration-from-Release/ta-p/741600

Best Regards,
Hayashi.K

Hi,

I want to translate the following article to Japanese. Please confirm to my work.
KBA "Short circuit safe operation area of IM241 CIPOS™ micro IPM series"
URL: https://community.infineon.com/t5/Knowledge-Base-Articles/Short-circuit-safe-operation-area-of-IM241-CIPOS-micro-IPM-series/ta-p/740439

Best Regards,
Hayashi.K

Hi,

I want to translate the following article to Japanese. Please confirm to my work.
KBA "Set and modify the stack size for PMG1 code examples in ModusToolbox™"
URL: https://community.infineon.com/t5/Knowledge-Base-Articles/Set-and-modify-the-stack-size-for-PMG1-code-examples-in-ModusToolbox/ta-p/740409

Best Regards,
Hayashi.K

Hi,

I want to translate the following article to Japanese. Please confirm to my work.
KBA "Speed sensor's type of hysteresis"
URL: https://community.infineon.com/t5/Knowledge-Base-Articles/Speed-sensor-s-type-of-hysteresis/ta-p/740399

Best Regards,
Hayashi.K

We use an Infineon FP 420 L 90 B magneto-resitive sensor to sense position in a precision tilt mechanism, but Infineon no longer makes this part. Does anyone know of a replacement part made by Infineon or another vendor that could take the place of this device?