XMC™ Forum Discussions

1.请问我在官网上看到了，伺服电机的方案。

2.请问这个方案是否开放？

3.如果开放能获得那些资料。

Whitepaper_CoolSiC™ – The_perfect_solution_for_servo_drives_EN (infineon.com)

Hi,

      I use the XMC4500F144K1024 chip as the main chip, and connect the TJAG download port of the slave ESP32 chip to the SPI pin of that chip. Is it feasible to use software to simulate SPI as a JTAG function and burn the program into the ESP32 chip? Is there any reference code or case for similar requirements that can be used for reference?

Thanks.

XMC4500-E144F1024 AC 

Hi,

I would like to know the Signal to Noise Ratio (SNR) and Total Harmonic Distortion (THD) of the integrated ADCs in the XMC4700 or XMC4800 microcontroller. These values are not shown in the datasheet and I cannot find them anywhere.

Thank you,

Víctor

Hi,

I'm looking for an complete example for using an external memory  (CY15B104QSN) with DSPI in modusToolbox.

My test board is the KIT_XMC72_EVK XMC7200 evaluation kit.
I did find a lot of code snippets, but none of them are complete using the device configurator and the QSPI configurator and finally having all steps from the initialisation till reading and writing from/to the device.

The board connector is J21 which I use.

Support is highly aprechiated.

BR

Martin

Hello,

I am trying to flash littlefs filesystem on the qspi external serial flash memory in XMC7100 V1.1. As I see library mtb-littlefs is not included in the XMC7100 kit but i have included the mtb-littlefs from PSoc6 Kit to my project and in makefile included target as XMC7100 (my board).

BOARD: XMC7100 EVK Lite v1.1

Memory: External QSPI flash memory

These are the errors when I try to builld the file:

Initializing build: mtb-example-psoc6-filesystem-littlefs-freertos Debug APP_KIT_XMC71_EVK_LITE_V1 GCC_ARM

Prebuild operations complete

Auto-discovery in progress...
Auto-discovery complete
Commencing build operations...

Tools Directory: C:/Users/Prasad/ModusToolbox/tools_3.2
"Using linker bsps/TARGET_APP_KIT_XMC71_EVK_LITE_V1/COMPONENT_/TOOLCHAIN_GCC_ARM/linker.ld"

Constructing build rules...
Build rules construction complete

==============================================================================
= Building application =
==============================================================================
Generating compilation database file...
-> ./build/compile_commands.json
Compilation database file generation complete
Building 223 file(s)
Compiling ../mtb_shared/mtb-littlefs/latest-v2.X/source/lfs_qspi_memslot.c -DCOMPONENT_APP_KIT_XMC71_EVK_LITE_V1 -DCOMPONENT_CAT1 -DCOMPONENT_CAT1C -DCOMPONENT_CAT1C4M -DCOMPONENT_CM7 -DCOMPONENT_CM7_0 -DCOMPONENT_Debug -DCOMPONENT_FREERTOS -DCOMPONENT_GCC_ARM -DCOMPONENT_MW_ABSTRACTION_RTOS -DCOMPONENT_MW_CAT1CM0P -DCOMPONENT_MW_CLIB_SUPPORT -DCOMPONENT_MW_CMSIS -DCOMPONENT_MW_CORE_LIB -DCOMPONENT_MW_CORE_MAKE -DCOMPONENT_MW_FREERTOS -DCOMPONENT_MW_MTB_HAL_CAT1 -DCOMPONENT_MW_MTB_LITTLEFS -DCOMPONENT_MW_MTB_PDL_CAT1 -DCOMPONENT_MW_RECIPE_MAKE_CAT1C -DCOMPONENT_MW_RETARGET_IO -DCOMPONENT_RTOS_AWARE -DCOMPONENT_SOFTFP -DCOMPONENT_XMC7x_CM0P_SLEEP -DCORE_NAME_CM7_0=1 -DCY_APPNAME_mtb_example_psoc6_filesystem_littlefs_freertos -DCY_RETARGET_IO_CONVERT_LF_TO_CRLF -DCY_SUPPORTS_DEVICE_VALIDATION -DCY_TARGET_BOARD=APP_KIT_XMC71_EVK_LITE_V1 -DCY_USING_HAL -DDEBUG -DLFS_THREADSAFE -DTARGET_APP_KIT_XMC71_EVK_LITE_V1 -DXMC7100D_F176K4160  -I. -Ibsps/TARGET_APP_KIT_XMC71_EVK_LITE_V1 -Ibsps -Ibsps/TARGET_APP_KIT_XMC71_EVK_LITE_V1/config/GeneratedSource -Ibsps/TARGET_APP_KIT_XMC71_EVK_LITE_V1/config -Ilibs/abstraction-rtos/include -Ilibs/abstraction-rtos -Ilibs/abstraction-rtos/include/COMPONENT_FREERTOS -Ilibs/cat1cm0p/COMPONENT_CAT1C -Ilibs/cat1cm0p -Ilibs/clib-support -Ilibs/clib-support/TOOLCHAIN_GCC_ARM -Ilibs/cmsis/Core/Include -Ilibs/cmsis/Core -Ilibs/cmsis -Ilibs/core-lib/include -Ilibs/core-lib -Ilibs/freertos/Source/include -Ilibs/freertos/Source -Ilibs/freertos -Ilibs/freertos/Source/portable/COMPONENT_CM7 -Ilibs/freertos/Source/portable -Ilibs/freertos/Source/portable/COMPONENT_CM7/TOOLCHAIN_GCC_ARM -Ilibs/mtb-hal-cat1/COMPONENT_CAT1C/include/pin_packages -Ilibs/mtb-hal-cat1/COMPONENT_CAT1C/include -Ilibs/mtb-hal-cat1/COMPONENT_CAT1C -Ilibs/mtb-hal-cat1 -Ilibs/mtb-hal-cat1/COMPONENT_CAT1C/include/triggers -Ilibs/mtb-hal-cat1/include -Ilibs/mtb-hal-cat1/include_pvt -Ilibs/mtb-hal-cat1/source -Ilibs/mtb-pdl-cat1/devices/COMPONENT_CAT1C/include -Ilibs/mtb-pdl-cat1/devices/COMPONENT_CAT1C -Ilibs/mtb-pdl-cat1/devices -Ilibs/mtb-pdl-cat1 -Ilibs/mtb-pdl-cat1/devices/COMPONENT_CAT1C/include/ip -Ilibs/mtb-pdl-cat1/drivers/include -Ilibs/mtb-pdl-cat1/drivers -Ilibs/mtb-pdl-cat1/drivers/third_party/ethernet/include -Ilibs/mtb-pdl-cat1/drivers/third_party/ethernet -Ilibs/mtb-pdl-cat1/drivers/third_party -Ilibs/retarget-io -I../mtb_shared/mtb-littlefs/latest-v2.X/bd -I../mtb_shared/mtb-littlefs/latest-v2.X -I../mtb_shared/mtb-littlefs/latest-v2.X/include 
../mtb_shared/mtb-littlefs/latest-v2.X/source/lfs_qspi_memslot.c:487:5: error: 'cy_stc_smif_mem_device_cfg_t' has no member named 'mergeTimeout'
  487 |     .mergeTimeout = CY_SMIF_MERGE_TIMEOUT_1_CYCLE
      |     ^
make[1]: *** [libs/core-make/make/core/build.mk:283: C:/Users/Prasad/mtw/Littlefs_Filesystem/Littlefs_Filesystem/build/APP_KIT_XMC71_EVK_LITE_V1/Debug/ext/mtb_shared/mtb-littlefs/latest-v2.X/source/lfs_qspi_memslot.o] Error 1
make: *** [libs/core-make/make/core/main.mk:385: secondstage_build] Error 2
"C:/Users/Prasad/ModusToolbox/tools_3.2/modus-shell/bin/make CY_MAKE_IDE=eclipse CY_IDE_TOOLS_DIR=C:/Users/Prasad/ModusToolbox/tools_3.2 CY_IDE_BT_TOOLS_DIR= -j8 --output-sync all" terminated with exit code 2. Build might be incomplete.

When I comment the line:

#if (CY_IP_MXSMIF_VERSION >= 2)
    /** Continuous transfer merge timeout.
     * After this period the memory device is deselected. A later transfer, even from a
     * continuous address, starts with the overhead phases (command, address, mode, dummy cycles).
     * This configuration parameter is available for CAT1B devices. */
    //.mergeTimeout = CY_SMIF_MERGE_TIMEOUT_1_CYCLE
#endif /* CY_IP_MXSMIF_VERSION */

I get failed to creat spi device block:

Could someone help me with ".mergeTimeout = CY_SMIF_MERGE_TIMEOUT_1_CYCLE" error?

When using the mtb-littlefs through the mtb-shared, how do I enable the cy_hal, freertos and thread in make file?
I tried to add the necessary comments on my application makefile but it is not enabling the corresponding if condition in the files in mtb-shared folder/mtb-littlefs!

best regard,
PrasadA