XMC™ Forum Discussions

I am running bldc motor with the help of hall sensor but not able to get full no load speed.This motor has 1000 rpm but getting only upto 3500 rpm.

I am using example code to drive this motor whether this code support 10000 rmp.

My motor is working at 48v,750 W.Could you help to resolve this problem 

Hello,

Now I can use one TIMER to set one time interval and trigger one event as shown in the picture below.

And project is also attached.

Is it possible that I only use one timer to trigger different event according to different time interval?

Thanks!

BR,

Lila

I would to know what would be an alternative to SAF-XC167CI-16F40F BB for new designs ,that does not require significant code changes.

I also have the old "XMC4800_AUT_Base-V2.1" with obsolete BCM5241 PHYs. Years ago I downloaded the demo software from the website, inserted the secret SSC source part and the board was up and running.

Now I also bought the newer "XMC4800_RELAX_ECAT_V2.1" with ADIN1200 PHYs and I was wondering how I can access the demo project source. I searched the website, I searched the ModusToolbox and I searched the Github with no success. 

Due to the SSC source limitation I know that it is not possible to get the entire project, but isn't there a project with the SSC part removed? Can someone please give me a hint?

Hi,

I am trying to implement the "OTW_Firmware_Upgrade" program in my XMC7100 Lite v1 board. I have implemented Lcs and is able to access other sample programs. 

When I try to implement "OTW_Firmware_Upgrade". I get the error:

 Status: failed

 Messages:

 [1]: there was an error retreiving the asset 'https://github.com/mcu-tools/mcuboot' commit 'v1.9.1-cypress' - Cloning into 'v1.9.1-cypress'..., fatal: unable to access 'https://github.com/mcu-tools/mcuboot/': SSL certificate problem: unable to get local issuer certificate, command 'C:/Users/<user>/ModusToolbox/tools_3.2/modus-shell/bin/bash -c git -C C:/Users/<user>/mtw/secureboot/mtb_shared/mcuboot clone --origin cypress --no-checkout --filter=blob:none https://github.com/mcu-tools/mcuboot v1.9.1-cypress', directory 'C:/Users/<user>/ModusToolbox/tools_3.2/dashboard', child process exited with error code 128

 [2]: Project 'bootloader_cm0p' in application directory 'C:/Users/<user>/mtw/secureboot/OTW_Firmware_Upgrade' - the getlibs operation failed

 [3]: Project 'dfu_cm7' in application directory 'C:/Users/<user>/mtw/secureboot/OTW_Firmware_Upgrade' - the getlibs operation failed

mcuboot v1.8.1-cypress
mcuboot v1.7.2-cypress
mcuboot v1.7.0-cypress
mcuboot v1.6.1-cypress
mcuboot v1.5.0-cypress
...
mtb-example-xmc7000-otw-firmware-upgrade        latest-v2.X
mtb-example-xmc7000-otw-firmware-upgrade        latest-v1.X
mtb-example-xmc7000-otw-firmware-upgrade        release-v2.0.0
mtb-example-xmc7000-otw-firmware-upgrade        release-v1.1.0
mtb-example-xmc7000-otw-firmware-upgrade        release-v1.0.0

Hi,

I'm working with a customer where it's needed to add another library to a project using IAR IDE, assuming they have already added their own application code. So the question is:

What is the best way to go about it?

I understand that using the BSP Assistant and Library Manager is the recommended method for ModusToolBox, but what about IAR?

Regards,

Marcelo - FAE at Neutronics

In the FOC project of XMC4700F-100K1536 microcontroller generated by DAVE APP, why can't the 6-way PWM pin configuration be consistent with my actual project now? In the FOC project that I have already written with registers, the pins are configured as follows

The upper bridge is: P0.9 P0.4 P0.10

The lower bridges are: P2.6 P0.1 P2.7

Our current hardware PCB are in accordance with the pin this cloth board, can run normally, but now because of other functional issues, the need to use DAVE to regenerate the project, but found that the use of DAVE APP configuration of the pin how to set up the pin can not be compatible with these pins, DAVE's PIN pin assignment program, all the arrangements do not have a P0.4 It's the 98 foot this app, what's going on please?

smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/XMC/%E8%AF%B7%E9%97%AE%E7%94%A8DAVE-APP%E7%94%9F%E6%88%90%E7%9A%84XMC4700F-100K1536-%E5%8D%95%E7%89%87%E6%9C%BAFOC%E5%B7%A5%E7%A8%8B%E4%B8%AD-%E8%BF%9B%E8%A1%8C6%E8%B7%AFPWM%E7%AE%A1%E8%84%9A%E9%85%8D%E7%BD%AE%E4%B8%BA%E4%BB%80%E4%B9%88%E5%92%8C%E6%88%91%E7%8E%B0%E5%9C%A8%E7%9A%84%E5%AE%9E%E9%99%85%E5%B7%A5%E7%A8%8B%E6%97%A0%E6%B3%95%E4%B8%80%E8%87%B4/td-p/739331