AURIX™ Forum Discussions
Hi members,
I have a question about How can I erase SMU ALM7[7].
This Alarm is related to the SPU Module, However, in this IC, There is no SPU Module.
So I wonder why this alarm is activated and How can I erase this alarm.
Every time I turn on this IC, the alarm is set to 0x1.
And I tried to clear All the Alarm, but Alram 7[7] was always High.
please let me know that.
Thank you.
Show LessIm using tc377 for uart communication, I have to send data from tx without interrupt by using Timer(Gpt12)
when i using this Data is stored in Tx buffer but not transmitting to Rx.
This is timer function
void interruptGpt12_T3(void)
{
IfxCpu_disableInterrupts();
IfxPort_togglePin(LED);
if(g_flag1 == 1)
{
send_receive_ASCLIN_UART_message();
}
IfxGpt12_T3_setTimerValue(&MODULE_GPT120, RELOAD_VALUE_T3);
IfxCpu_enableInterrupts();
}
This one data transfer and receive function through uart
extern void send_receive_ASCLIN_UART_message(void)
{
IfxAsclin_Asc_write(&g_ascHandle, g_txData, &g_count, TIME_INFINITE); /* Transmit data via TX */
IfxAsclin_Asc_read(&g_ascHandle, g_rxData, &g_count, TIME_INFINITE); /* Receive data via RX */
}
Show Less
Hi, I can't add any printf or can't use UART from sample Ethernet application
if I add anything there it is crashing
I need to process data after receiving from Ethernet but if I try to do anything application just crash. So how and where to process Ethernet data.
Show LessHi, I am using Aurix TC375 Lite Kit development board and tried the freeRtos example code.
But after compilation, once the code is put in the debugger mode then the tsim issue comes as below snapshot --
Please get me a solution for this issue asap.
Thanks.
Show LessI am using Application Kit TC3X7 V2.0 TFT board
I have configured BMHD but the board all the time boots from Internal flash ignoring BMHD settings
If i want to use Alternate Boot Mode or BMI to boot , which all changes i need to do on the board?
Show LessThis Q&A just discussed P/D Flash, AURIX™ MCU: Error Correction Code (ECC) support - KBA238244
My question: is there special ECC for RAM and CAN relevant memory, e.g. Message RAM
Show LessHi there,
Can you confirm whether the statement below is true?
"Where a watchdog timeout alarm (CPU or safety) is triggered the microcontroller will always reset"
I am learning about recovery timers and so far through my observation this appears to be true. I find the wording in the manual ambiguous however, where the word "ensure" is used in reference to this.
Thanks
Show Less
请教大家一个问题
我现在做的boot程序在跳转app程序的时候,如果boot程序和app程序都没有使用中断的情况下可以正常跳转,但是boot程序或app程序有一方面使用中断的话就会进入到debug,boot程序或app程序单独运行时没有问题。下面按照串口中断举例。
调试状态下会卡在下图位置:
我想知道是哪个地方设置的不对或者少设置了什么地方。
Show Less