AURIX™ Forum Discussions
Hello Community,
I am started using TC233 development board for few days and i ant now to display a hello wolrd or messga in the Console but i didn' found how to do i tried also to display it on the putty but also it doesn't work.
is there any code exmaple or something that can help me.
Thank you
I am using Application Kit TC3X7 V2.0 TFT board
I have configured BMHD but the board all the time boots from Internal flash ignoring BMHD settings
If i want to use Alternate Boot Mode or BMI to boot , which all changes i need to do on the board?
Show LessHello,
We are trying to flash binaries which has empty cells using Infineon MemTool (version 4.08.01) after the P-Flash erased.
But the Memtool programing the empty cells with all zreo values.
SW is checking that area has in erased state or not. So, SW is not working b'coz empty cells have values all zeros.
but other debugger flashing working with option: program empty cells "FALSE" setting
Please help us. if any setting required to do in Memtool
Show Less#TC387
Hello, I meet with a problem when flash to B bank using bootloader. After having flashed, the B bank filled with 0xFF, if config A bank as active bank, the A bank filled with oxFF, do you know some possible reasons?
Show LessHi, I am using TC 387. Is it possible to do multi tasking in this board in a single core?
Hi I need to fetch data from ethernet module in ethernet_input function. But it crashes if I try to fetch anything.
ethernet_input(struct pbuf *p, struct netif *netif)
Is there any way to get data from there? I need to make some CAN packet using those.
Show Less
Hello Infineon Team,
I am using TC377_ED_EX AURIX Tricore microcontroller, I have integrated RTOS code with my general configurations, code was built successfully in Tricore IDE, however after flashing code in Lauterbach T32 debugger, and doing step over at every function and getting trap at __mtcr().
If code is in trap, then in some trap registers it should show status in trap registers, but in Trap registers also there is no specific value only 0000000 given.
for better understanding, I am attaching screenshots of call stack, error window, & registers value log
Hope you will provide me better solution to overcome this issue.
Thanks,
Poonam
Show Less
近日,我购买了一块KIT_AURIX_TC397_TFT板子,里面是官方默认的固件, 我看说明书里通过板子的Mini USB连接PC (Windows 10 ),就可以识别到板子,但是我用usb连接后,板子TFT屏幕正常点亮,只有D106 (V_UC)、D104 (SS2)灯亮和P13中的一颗灯在闪烁,但在PC设备管理器里面找不到Infineon JDS DAS COM和Infineon JDS DAS Debug,安装DAS软件也无法识别,这种情况应该怎么处理?
Show LessHi, I am using Aurix TC375 Lite Kit development board and tried the freeRtos example code.
But after compilation, once the code is put in the debugger mode then the tsim issue comes as below snapshot --
Please get me a solution for this issue asap.
Thanks.
Show Less