PDA

View Full Version : begginer: XMC 4500 Relax lite kit



vladikpri
Aug 19th, 2013, 05:43 AM
Hi
I am new at this field with micro-controllers...
usually I program stuff and I know how to write the code
but my lack of knowledge is in the controller itself
how do I find/know to address of the ports that I want to wrote to them?
for example if I want to generate PWM signal to the p2.1 pin of the controller
or just to give a logic 1/0 how to I know to witch port/address send it?

thanks a lot
Vladik

Travis
Aug 19th, 2013, 07:08 PM
Hi vladikpri, Welcome to the forum.:D

to generate PWM for XMC4500, you can make use of the peripherial CCU. We have ready apps to support your PWM generation in DAVE3. To get yourself ready please download the necessary tool chain from...

http://www.infineon.com/cms/en/product/promopages/aim-mc/DAVE_3_Support_Portal/DAVE_3_Support_Portal.html

Lastly, maybe you can tell me your requirement and I see how I can guide you there.

Best Regards
Travis

Rou
Aug 19th, 2013, 11:23 PM
Hi Vladik,

I would suggest you to read the Reference Manual to understand how these peripherals works.
You can download the Reference Manual at:
http://www.infineon.com/dgdl/xmc4500_rm_v1.3_2013_08.pdf?folderId=db3a30433580b 3710135a47f3eb76c98&fileId=db3a30433580b3710135a5f8b7bc6d13&sd=t
Good luck and happy reading.. ;)


rgds,
Rou