- Why use CoolSiC MOSFETdevices?
- Nomenclature
- Body Diode
- SiC MOSFET without external SBD?
- Why are EiceDRIVER ICs a perfect fit to Silicon Carbide MOSFETs?
- Drift
- Gate drivers
- CoolMOS vs CoolSiC
- SiC Mosfet Avalanche Capability?
- Emi
- Gate source voltage
- layout optimizing
- Reduction of cost
- SiC vs IGBT
- Parallel connection of SiC MOSFETS
- any success stories?
- switching frequencies
- Why SiC in low power solar applications
- Applications for SiC
- threshold voltage
- Why is minimizing dead time important?
- Question about the voltage-class
- What is the SiC diodes robustness during fast commutation without co-pack diode?
- Snubber needed?
- no surge rating in the DS?
- Eliminate oscillation
- Information on measurement techniques of high-speed voltage and current waveforms
- Cost of sic
- 4 pin vs 3 pin
- dependency of short circuit capability with some factors
- Double pulse testing vs IGBTs
- dv/dt for an SiC MOSFET
- Differences in designs
- mOhm rating of SiC
- Eval PCB's and app notes - what do you offer?
- SiC in eBus auxiliary drives
- robustness of SIC compared with IGBT and MOSFET
- 650 V and 1700 V SiC
- Experience with SiC in motor drives
- Request on CMTI
- Two pairs of gate source pins
- Coupling capacitance drivers & SiC - recommended values
- Promoted Link List
- PCB configuration - how to?
- Simulation Models for SiC MOSFETs
- Switching 1500Vdc/10A
- Characterization of MOSFETs vs IGBTs
- 1.2kV / 6mR SiC Power Module + EiceDriver maximum Fs
- SiC MOSFET simulation model IMW120R060M1H
- Safe operating area for FF23MR12W1M1P_B11