sak-xc2365a-104f80l

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Not applicable
I am trying to connect my sak-xc2365a-104f80l using Infenion Memtool.I am getting following error:


Message from component 'IMTMemtool' :
Cant connect to Target

Message from component 'MiniMonTargIntf' :
Cant connect target !

Message from component 'MiniMonTargIntf' :
Bootstrap loader not responding !
0 Likes
8 Replies
chismo
Employee
Employee
First like received
Hello,

Are you using the starter kit or your own board?
And are you connecting with a mini-wiggler?

Regards,
Min Wei
0 Likes
Not applicable
Hello Min Wei,

Yes I am using infineon starter kit
I m trying to connect with Mem tool.

Thanks & Regards,
Arunchand
0 Likes
Not applicable
Below is the screen shot
1478.attach
0 Likes
Not applicable
Hello Min Wei,

Can you please reply

Thanks & Regards,
Arunchand
0 Likes
chismo
Employee
Employee
First like received
Hello Arunchand,

I am using a XC2220U kit and with this board, I can connect to the memtool by:
1) Selecting the target in memtool to be "Easykit with XC2220U-8F (DAS)".
2) Connecting the USB cable to PC.
3) Click on button.

Can you select also the DAS option and see if it makes a difference?
Btw, you should also check that the board is detected correctly through your PC's device manager, under Ports (COM & LPT). You should be able to see something like "Infineon DAS JDS COM (COM number)".

Regards,
Min Wei
0 Likes
Not applicable
Hello Min Wei,

Thanks for your reply!!!

I have already done the above mentioned steps,Still I am getting error :

Message from component 'IMTMemtool' :
Can't connect to Target

Message from component 'MiniMonTargIntf' :
Can't connect target !

Message from component 'MiniMonTargIntf' :
Bootstrap loader not responding !
Please check:
- Target power supply
- Communication cable
- Communication settings
1481.attach1482.attach

Thanks & Regards,
Arunchand
0 Likes
chismo
Employee
Employee
First like received
Hello Arunchand,

Your screenshot still shows "Easykit with XC2365A-104F (BSL/ASC)".

But you do mean "Easykit with XC2365A-104F (DAS)" and this is not working still?
I assume you have DAS already installed.

Regards,
Min Wei
0 Likes
Not applicable
Hello Min Wei,

Thankyou so much...
I am able to connect with the target board.


Thanks & Regards,
Arunchand
0 Likes