Apr 07, 2015
03:46 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Apr 07, 2015
03:46 AM
Boot ROM (BROM)
The Boot ROM memory contains the boot code and the exception vector table. The basic system initialization sequence code, also referred to as firmware, is executed immediately after reset release.
Flash memory
The Flash is for non volatile code or constant data storage. The single supply Flash module is programmable at production line end and in application via built-in erase and program commands. Read and write protection mechanism are offered.
The integrated cache provides an average performance boost factor of 3 in code execution compared to uncached execution.
The Boot ROM memory contains the boot code and the exception vector table. The basic system initialization sequence code, also referred to as firmware, is executed immediately after reset release.
Flash memory
The Flash is for non volatile code or constant data storage. The single supply Flash module is programmable at production line end and in application via built-in erase and program commands. Read and write protection mechanism are offered.
The integrated cache provides an average performance boost factor of 3 in code execution compared to uncached execution.
- Tags:
- IFX
2 Replies
Not applicable
Apr 15, 2015
08:21 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Apr 15, 2015
08:21 AM
Where can I find the BootRom Code?
Apr 19, 2015
07:02 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Apr 19, 2015
07:02 PM
Hi,
It's factory programmed into the flash and cannot be modified by the user.
Best Regards
Travis
It's factory programmed into the flash and cannot be modified by the user.
Best Regards
Travis