Not applicable
Feb 17, 2015
12:44 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 17, 2015
12:44 AM
Hi,
I have an 4 - Wire Master and 2 Wire - Slave. The Connections look like the picture.
With a PC over the serial card, i monitoring(HTerm) the Bus. The Master sending the Request and the slave replies correctly, but in the RBUF is the message what the master has sent. There is, i cant receive the response from Slave, on my Hexagon Kit.I think i could solve this Problem, if the Transceiver would have a Driver Enable.
Maybe someone has an idea for me ?
I hope I could express my problem. 🙂
Thanks You.
I have an 4 - Wire Master and 2 Wire - Slave. The Connections look like the picture.
With a PC over the serial card, i monitoring(HTerm) the Bus. The Master sending the Request and the slave replies correctly, but in the RBUF is the message what the master has sent. There is, i cant receive the response from Slave, on my Hexagon Kit.I think i could solve this Problem, if the Transceiver would have a Driver Enable.
Maybe someone has an idea for me ?
I hope I could express my problem. 🙂
Thanks You.
- Tags:
- IFX
0 Replies