Not applicable
Dec 02, 2014
03:59 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dec 02, 2014
03:59 AM
Hi All,
I have generated 2 PWM's of 10us period with manual dead time generation period of 1us. Both pulses are inverted to each other (as per my requirement).
First pulse = 0 to 70%
Second pulse = Follows first pulse with 1us dead time generation.
Assume, First pulse on time = 70%
Than second pulse on = 30% - 10% = 20% (inverted from first pulse), where 10% = 1us dead time delay before putting on second pulse
BUT,
I need second pulse to be on 1us, 2us, 3us based upon different condition. I tried various ways but it always comes as 20%. I want to make it on with 10%, 20%, 30%.
Can somebody help me?
Thanks
I have generated 2 PWM's of 10us period with manual dead time generation period of 1us. Both pulses are inverted to each other (as per my requirement).
First pulse = 0 to 70%
Second pulse = Follows first pulse with 1us dead time generation.
Assume, First pulse on time = 70%
Than second pulse on = 30% - 10% = 20% (inverted from first pulse), where 10% = 1us dead time delay before putting on second pulse
BUT,
I need second pulse to be on 1us, 2us, 3us based upon different condition. I tried various ways but it always comes as 20%. I want to make it on with 10%, 20%, 30%.
Can somebody help me?
Thanks
- Tags:
- IFX
0 Replies