winIDEA in DAVE3 is not work

[User3162]

Hi,

I'm trying to use winIDEA debug feature according to infineon document(winIDEA_open_DAVE_Install_QuickStart_1-0.pdf)
But, debug is not working (Refer to attched file)

I have used

DAVE3 Verion :3.1.10
J-Link :4.80f
Demo Kit : XMC2GO , XMC1300 bootkit



What is reason of this error massage?
What is another consideration to use winIDEA?

Thanks.

[Travis]

This thread has been moved to DAVE forum.

[#3]

Hi Cho,

It has been forwarded further, will update you once get reply.

Best regards,
Sophia

[#4]

Hi Cho,

You need to "Enable SWO" in "Segger Options" window before you can debug.

To open "Segger Options" window, go to "WinIDEA Configuration":





Our colleague will revise the tutorial soon.

Best regards,
Sophia

[User3162]

Hi Sophia.

Thank you for your support and it is working now. ^^

Thanks.

[#6]

Hi Cho,

To be precise, you should configure SWD as Debug Interface (default is AUTO).



However, SWD will be automatically selected by enabling SWO. But, because XMC1xxx has no SWO trace data line. So, configuring SWD as debug interface should be the option for XMC1xxx.

Best regards,
Sophia