Not applicable
May 18, 2014
11:51 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
May 18, 2014
11:51 AM
Hi there,
I would like to use a 7-segment LED Display on the XMC1300 Boot Kit. Unfortunately I cannot migrate the example 7_Segment_Display_Example1_XMC12 to the XMC1300 device because only XMC1200 series devices can be selected.
I also tried to start with a new project, targeting the XMC1300. But I cannot find the DISP_7SEG01 App then. The DISP_7SEG01 App can be found only, if the 7_Segment_Display_Example1_XMC12 is set active.
Looking forward to your help.
Regards,
gaw
I would like to use a 7-segment LED Display on the XMC1300 Boot Kit. Unfortunately I cannot migrate the example 7_Segment_Display_Example1_XMC12 to the XMC1300 device because only XMC1200 series devices can be selected.
I also tried to start with a new project, targeting the XMC1300. But I cannot find the DISP_7SEG01 App then. The DISP_7SEG01 App can be found only, if the 7_Segment_Display_Example1_XMC12 is set active.
Looking forward to your help.
Regards,
gaw
Labels
0 Replies