Not applicable
Apr 16, 2014
07:03 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Apr 16, 2014
07:03 AM
5 Replies
Not applicable
Apr 20, 2014
10:47 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Apr 20, 2014
10:47 PM
Hi ASHISH,
Did you configure your XMC4500 with UART001 DAVE App?
What is your configuration?
Did you configure your XMC4500 with UART001 DAVE App?
What is your configuration?
Not applicable
May 13, 2014
11:59 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
May 13, 2014
11:59 PM
Hi JACKSON,
i got my problem solved , actually i have not configured the input stages of the input control register properly that time. Now it is working fine.
i got my problem solved , actually i have not configured the input stages of the input control register properly that time. Now it is working fine.
Not applicable
May 31, 2014
12:21 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
May 31, 2014
12:21 PM
Hi all,
I'd have exact the same problem: I'm able to send data from the microcontroller to the PC via UART but I'm not able to receive data. I actual see the data on the wire but the microcontroller doesn't seem to react.
I've configured my XMC4500 board with the UART001 DAVE App running the following code:
These are my settings:
Manual Pin Assignment:
UART Receive: Pin1.4
UART Transmit: Pin1.5
All other configuration options are set to default. Furthermore I am using a Silicon Labs CP2102 USB to UART Bridge Controller.
Many thanks for any help in advance,
stulle
I'd have exact the same problem: I'm able to send data from the microcontroller to the PC via UART but I'm not able to receive data. I actual see the data on the wire but the microcontroller doesn't seem to react.
I've configured my XMC4500 board with the UART001 DAVE App running the following code:
#include
int main(void)
{
char test;
DAVE_Init();
while(1)
{
while((UART001_GetFlagStatus(&UART001_Handle0,UART001_FIFO_STD_RECV_BUF_FLAG))!=UART001_SET);
test = UART001_ReadData(UART001_Handle0);
UART001_WriteData(UART001_Handle0, test);
UART001_ClearFlag(&UART001_Handle0,UART001_FIFO_STD_RECV_BUF_FLAG);
}
return 0;
}
These are my settings:
Manual Pin Assignment:
UART Receive: Pin1.4
UART Transmit: Pin1.5
All other configuration options are set to default. Furthermore I am using a Silicon Labs CP2102 USB to UART Bridge Controller.
Many thanks for any help in advance,
stulle
Not applicable
Jun 02, 2014
08:38 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 02, 2014
08:38 PM
Hi Stulle,
Your DAVE App doesn't seems to be the latest version.
May I know what version of DAVE3 IDE you are using? and the version of the UART001 app?
The latest version of the app should be 1.0.24.
Your DAVE App doesn't seems to be the latest version.
May I know what version of DAVE3 IDE you are using? and the version of the UART001 app?
The latest version of the app should be 1.0.24.
Not applicable
Jun 05, 2014
07:27 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 05, 2014
07:27 AM
Problem solved.
I've created a new DAVE project from scratch and now it's working. Don't ask me why, settings are exactly the same as before. Somehow my previous project messed up.
Thanks for help.
I've created a new DAVE project from scratch and now it's working. Don't ask me why, settings are exactly the same as before. Somehow my previous project messed up.
Thanks for help.